ForConstructionPros.com

Basic one coat with sealer or multicoat stain applications with decorative saw cuts make up the largest percentage of decorative staining projects, but there is a growing number of clients asking for something more after they see the design possibilities that can be achieved with decorative concrete. If you are currently successfully staining concrete or just starting out, there are many easy specialty techniques you can use to help take your decorative projects to the next level.

Unique effects can be achieved with some common items found around your shop or at the local hardware store. Torn paper, cheesecloth or sea sponges can be used to apply stains or to apply sealers that will act as a resist. A resist is anything that impedes the stain from penetrating into the surface of the concrete substrate. Once the appropriate amount of sealer has been applied and has had sufficient dry time, it forms a barrier that blocks acid-based stains and some other liquids from penetrating the concrete surface. With some creativity and experience using sealers as resists, you can stretch your imagination and create exquisite results. We regularly incorporate veins into the floor designs prior to staining by applying sealer with an artist brush or eyedropper. Other commonly used tools include crumpled up rags and goose feathers. Remember, not all sealers are equal; when using the resist technique, a test panel should be conducted for the appropriate amount of sealer as well as your technique.

Fertilizer, sawdust, kitty litter or other absorbent materials are just a few more examples of common items you can use to create special effects in your staining. The iron and nitrogen in fertilizers dissolve during the staining process, leaving behind permanent etchings on the floor. Sawdust and kitty litter applied to the concrete surface during the stain application will absorb the stain and leave an outline on the floor.

Plastic is another great material that can be used for creating graphic effects. While the stain is still wet on the surface, take a thin mil plastic, sometimes referred to as visqueen, and lay it on the wet surface purposely creating creases in the plastic. Allow the stain to thoroughly dry and then remove the plastic. A unique series of veins will be left behind depending upon where the plastic was touching or not touching the concrete substrate.

When concrete dyes are combined with chemical stain, there are no limitations from a predetermined color pallet. Many artisans consider concrete dyes a companion on many chemical stain jobs for a variety of reasons. Dyes can produce bright, vibrant colors such as yellows and blues and can also be mixed together to create your own custom colors. Dyes are often used as an additional accent color over the top of a previously stained and cleaned surface. Many times we will take craft or building paper and rip it, creating a jagged-edged template. We then lay the template down on the concrete and spray dye over the edge of the torn paper creating interesting graphics.