ForConstructionPros.com

400 Series 3 Skid Steer Loaders

Clean-burning, Tier III-certified engines from 57 to 83 net hp are now available on the Case 410, 420, 430, 435, 440, 445, 450 and 465 skids steers.

• Cabs feature a 7% increase in headroom and 6% increase in lap-bar width, along with improved forward, side, rear and overhead visibility
• Standard suspension seat, cushioned lap bar with arm rest, ergonomically designed control handles and foot throttle
• Side lighting for full visibility to the sides during nighttime operation
• Service features include improved oil and fuel filter access, wide-fin side-by-side radiator and oil cooler and improved cold starting
• Pilot controls available

65E Compact Motor Grader

The NorAm 65E features an articulated frame, torque proportioning rear axle, wheel lean, and inch control on a compact motor grader. The grader is powered by a 110-hp Cummins engine and has an A-frame design with gear driven 53-in. circle configuration. A standard 10-ft. or optional 12-ft. "rollaway" moldboard is available for the grader.

65NX

The 14,300-lb. 65NX has an 8-ft. 4-in. minimum front swing, allowing for maneuverability in tight conditions.

• 12-ft. 10-in. digging depth with a 21-ft. 4-in. reach
• 55-hp Yanmar diesel engine
• 1.7/3.3-mph travel speeds
• Auxiliary hydraulics
• Standard quick-change valve
• Spacious cabin with wrist control-type short joysticks
• Oil pressure measurement port with quick coupler
• Right-side access to control valves