Updated: July 8th, 2008 05:26 PM GMT-05:00
Compaction Equipment
Terex Vibratory Plate Compactors
Wacker BS 50-4s and BS 60-4s Rammers
Vibco VR-20 Reversible Plate Compactor
Stone XH670D and XH730D Stompers
Multiquip MTX-Series Gas-powered Rammers
Arrow-Master P-Series Plates
MTA Distributors Tiger ProRam
By Equipment Today Staff
BOMAG BT60/4 Tamper
The 137-lb. BT60/4 is powered by a 3.3-hp four-cycle Honda GX100 engine, offering the convenience of a four-cycle, yet maintaining the high stroke and impact force of a two-cycle model.
- Can be transported in a horizontal position
- Low oil alert system with electronic warning device
- Maximum travel speed of 66 fpm and a range of 540 to 708 impacts per minute
Terex Vibratory Plate Compactors
Terex vibratory plate compactors are available in three sizes with centrifugal forces up to 3,600 lbs.
- Operating weights up to 200 lbs.
- Eight-point dampening system to isolate vibration from machine components and operator
- Steel belt guards reduce stone and debris damage to the pulley or belt
Wacker BS 50-4s and BS 60-4s Rammers
The BS 50-4s and BS 60-4s rammers are powered by a 2.8-hp Wacker WM 90 four-cycle engine.
- Patent-pending low oil shutoff with indicator light
- Advanced air filtration system and specifically tuned carburetor intake manifold allow for faster warm-up times and improved transition from idle to full speed
- Crankcase specifically designed for four-cycle engine
- 137-lb. BS 50-4s delivers 680 bpm, while the 154-lb. BS 60-4s hits at a rate of 680 bpm
Vibco VR-20 Reversible Plate Compactor
The 311-lb. VR-20 reversible plate compactor delivers 4,350 lbs. of centrifugal force with a frequency of 3,850 vpm.
- Up to 15-in. compaction depth
- Forward travel speed of up to 65 fpm
- 6.5-hp Honda engine
- Double V-belt drive and oversized isolation mounts for operator comfort
- 20" x 19" self-cleaning plate
- Easily installed water tank
Weber MT Compatrol-MSM
The Compatrol-MSM has machine and service management functions added to the compaction control panel.
- Entire area being compacted is monitored continuously
- Weak points identified and eliminated for uniform compaction
- Quick system analysis and potential failure locator
- Data storage for coverage and evaluation of machine data
- Early warning system results in less machine damage due to neglected maintenance
Printer Friendly