ForConstructionPros.com

Wacker Concrete Ride-on Trowel
Two joystick controls and a reprogrammed onboard computer allow the CRT-48-31V-ES-E to deliver effortless control, greater responsiveness and lower operator fatigue.

• Enables operator to identify changing concrete conditions and easily work through them
• High-performance clutch system for maximum torque at low speed, smooth shifting and increased belt life
• 31-hp gasoline engine and variable-drive transmission
• Lightweight design suitable for use on elevated decks

Allen Hydra Drive 560
The HD560 riding trowel features all-hydraulic power steering drive, eliminating the need for manual levers, clutches or mechanical gearboxes.

• Full 12-in.-wide "stretch" frame with 18-in. spacing between the pans
• Features two 5-ft.-diameter six-bladed rotors, Generation III all-hydraulic proportional joystick power steering, powered pitch control and built-in cruise control in the seat frame
• 99-hp Kubota diesel engine

Stone CF484 Trowel
48-in. CF484 trowel features fine-tuned pitch control or optional ProPitch for fast, smooth blade adjustment.

• Four combination or finished blades
• Extra-strong cast iron spider
• Available with an 11-hp Honda, 11-hp Robin or 13-hp Honda engine
• Dyna-Clutch system stops blade rotation

without shutting off the engine

MBW MK8-75H Riding Trowel
The 320-lb., 13-hp MK8-75H LOWRIDER trowel features twin 30-in. rotors and an edger system for finishing nearly flush to walls.

• Can be equipped with finish or combo blades and float pans
• Synchronized steering
• Able to pass through a 32-in. doorway
• Three rollers on the front guard ring enable finishing within approximately 1/4 in. of a wall

Terex Bartell Power Trowels
The Bartell HS90 overlapping, high-speed finishing trowel and the Bartell LP95 non-overlapping, lightweight panning trowel are powered by 35-hp air-cooled Briggs & Stratton V-Twin engines.

• Drivetrain comes with continuously variable transmission primary reduction, stock "Powergrip" secondary reduction and heavy-duty worm gear final reduction
• HS90 has dual five-blade trowels and offers a 240-rpm maximum operating speed
• LP95 has dual four-blade trowels and achieves speeds up to 180 rpm