ForConstructionPros.com

BOXER 700 Series Articulating Loaders

The 700 Series articulating loaders boast powerful, fuel-efficient diesel engines and extending booms for added reach. All models have hydrostatic transmissions, four-wheel drive and frame articulation, allowing for maneuverability in tight spaces. Low ground pressure allows the units to maneuver over lawns and landscapes with minimal damage to the ground. The user-friendly controls and an ergonomic suspension seat ensure operator comfort and 360° visibility. The 749DT uses standard skid-steer attachments, while the 726DT and 732DT use mini-skid steer attachments.

BOXER Equipment

Eagle Claw Bit

The 4 1/4-in. Eagle Claw can rip through sandstone, shale and cobbles. It features carbide buttons to minimize wear, quick-change carbide cutter teeth and a balanced cutting design to improve stability and decrease vibration. Aggressive tri-tooth carbide cutting action gets through hard conditions, and the conical shaped steering face allows for quick reactions to directional pushes. The bit is the optimal size for the Ditch Witch JT2020, the Vermeer D20x22 and the Astec DD2024.

Melfred Borzall, Inc.

SV610-III Series Soil Rollers

The SV610-III Series 12-ton class soil rollers come in three model variations with dual amplitude, centrifugal forces up to 58,450 lbs. and an 84-in. drum width. The SV610D-III smooth drum model weighs in at 27,555 lbs. and is designed for rock and granular materials. The SV610T-III 27,710-lb. padfoot roller is suited for cohesive materials, silts and clays. The 32,560-lb. SV610TF-III model includes a padfoot/smooth drum combination. The padfoot drum is encased within a bolt-on smooth drum shell that can be removed when working on cohesive soils. The units are powered by a fuel efficient 148-hp Cummins QSB4.5 water-cooled, turbocharged, Tier III, diesel engine.

Sakai America, Inc.

Telescopic Big Boom HB86TJ+

• 75-ft. 6-in. outreach
• Simultaneous movements
• 8-ft. platform
• Capacity to rapidly lift heavy loads up to 772 lbs.
• 19-ft. 8-in. telescopic jib with proportional controls allows reach to the most inaccessible worksites
• Narrow fixed-width frame, oscillating axle and differential wheel lock allows for operation in wide range of areas

The HB86TJ+ telescopic big boom features a 75-ft. 6-in. outreach, and can rapidly lift heavy loads up to 772 lbs. on its 8-ft. platform. The boom and 19-ft. 8-in. telescopic jib, with its octagonal cross section in high elastic modulus steel, are highly rigid for greater stability, yet offer the flexibility to reach the most inaccessible worksites. Proportional controls and a self-leveling system ensure maximum operator comfort. Simultaneous movements, a narrow fixed-width frame, oscillating axle and differential wheel lock enable operation in a wide range of areas and working environments.

Haulotte Group | BilJax

V500 Low-profile Vacuum Excavator

With a shorter wheelbase and a height of only 84 in., the V500 low-profile vacuum excavator is designed to provide easier access to confined spaces, as well as a lower center of gravity for increased stability on the jobsite and during transport. A 575-cfm blower with 3-in.-diameter hose allows for efficient spoils removal. The 4-gpm water pump delivers 3,000 psi of water flow to slice through the most difficult soil conditions. The three-stage filtration system enables both wet and dry vacuum excavation. Two standard 50-gal. saddle tanks provide 100 gal. of water; two 125-gal. saddle tanks are also available. A quiet pack power system provides for reduced engine noise levels.

McLaughlin Mfg. Co.