For Construction Pros
Constant blow energy ensures all blows are at full power
Available as silenced CITY models
Front end protected by housing
Slip-fit thrust ring and upper tool bushing ensure piston and tool alignment
Field-replaceable lower tool bushing
Redesigned operating piston, main valve and internal porting for increased power
Slight increase in low-pressure nitrogen gas charge
Wider input flow range for use on low- and high-output carriers
Fewer than 40 total parts
Multi-fit bracket for mounting on various prime movers
360ยบ continuous rotation
Knife and anvil cycle at same rate and on the centerline of the tool
Available in 11 sizes to accommodate any make and model of carrier from 5,000 lbs. and up
Pin-on, interchangeable jaw sets can be switched in minutes
Working weight of 6,400 lbs.
Heavy-duty, reinforced, two-plate bracket design
Long-stroke piston design
Special alloy bushings for optimized wear life
Anti-stress hose mounting
Patented, two-way, reversible, bolt-on Saber Tip can be rotated or changed out in 15 minutes
LaBounty Blade System
Dual guide slide puck system
10% to 15% increase in cutting force
Reduced shroud height
E-mail Article
Printer Friendly
Products
Bookmark Page
Most Read
Most Emailed
Email Story
Print Story
Updated: July 8th, 2008 05:26 PM EDT
Demolition Attachments
Related Articles
Read More Products
Compaction Equipment
Trucks
Construction Equipment Introductions
Read More New Product Gallery from ForConstructionPros.com
Study Finds Serious Problems in Handling of Katrina Aid Money from Abroad
New Products
Turner Corporation Forecasts Increase in Construction Costs For the First Quarter of 2006
Increases In Fuel Spill Accidents Raise Concerns About Roadway Infrastructure
Rammer by Allied S-Series Hammers
The S-Series hammers are available for mini-excavators, skid steers, loader-backhoes, demolition robots and stationary pedestal breakers.Huskie Hydraulic Hammer Series II
The HH150-2 through HH1000-2 Series II breakers feature impact energies from 200 to 1,200 ft.-lbs.Allied-Gator MT Series Multi-Tool
The MT Series Multi-Tool uses the Power-Link and Guide System to increase tool force and deliver precise jaw alignment when shearing or crushing.Okada Top 300 Breaker
The Top 300 hydraulic breaker is available for 60,000- to 95,000-lb. carriers.Stanley LaBounty MSD Saber Series
The MSD Saber Series mobile shears are available in eight models for excavators from 40,000 to 110,000 lbs.FFC Attachments T-Rex
E-mail Article
Printer Friendly
