ForConstructionPros.com

Article

  

Products

Updated: July 8th, 2008 05:26 PM EDT

Dewatering Pumps

Product Spotlight

Thompson 6-in. Vacuum-assist Pump
Thompson 6-in. Vacuum-assist Pump
Honda WB Series Pumps
Honda WB Series Pumps
Multiquip QP-305SLT Pump
Multiquip QP-305SLT Pump
Grindex INOX Pumps
Grindex INOX Pumps
Gorman Rupp Environmental Silent Pump
Gorman Rupp Environmental Silent Pump
Wacker Centrifugal Trash Pumps
Wacker Centrifugal Trash Pumps
ITT Flygt 2600 Series Dewatering Pumps
ITT Flygt 2600 Series Dewatering Pumps
MTA Distributors Tsurumi EPT3 Series
MTA Distributors Tsurumi EPT3 Series
Subaru Robin Diesel Trash Pumps
Subaru Robin Diesel Trash Pumps
Godwin HL Series Dri-Prime Pumps
Godwin HL Series Dri-Prime Pumps

By Equipment Today Staff

Thompson 6-in. Vacuum-assist Pump
The 6V-DDST-4-2011 6-in., vacuum-assisted pump handles up to 3-in. solids, and is capable of flows up to 1,450 gpm and heads up to 88 ft.

  • Cooling system allows pump to run dry without damage while handling suction lifts up to 28 ft.
  • Super Suction vacuum system provides fast priming and prevents discharge of pumping effluent onto the ground
  • Pump housing does not have to fill with water to obtain original prime at startup

Honda WB Series Pumps
The 4.5-hp WB20 and 5.5-hp WB30 are powered by easy to start Honda OHV commercial-grade engines with Oil Alert.

  • WB30 delivers a maximum discharge capacity of 275 gpm and a maximum head of 83 ft.
  • WB20 discharges up to 153 gpm with a maximum head of 94 ft.
  • Heavy-duty full frame protection
  • Rigid-mounted cast iron pump volute
  • Abrasive-resistant silicone-carbide mechanical seal

Multiquip QP-305SLT Pump
The 110-lb. QP-305SLT 3-in. centrifugal pump has a maximum shutoff head of 328 ft. with a top pressure of 142 psi.

  • Moves up to 145 gpm and features a dual impeller system to generate higher pressure
  • Includes two 1-in., one 1.5-in. and an optional 3-in. discharge port
  • 11-hp Honda GX-340 gasoline engine
  • Also features a cast aluminum volute, low-oil shutdown and a ceramic/carbon mechanical seal

Grindex INOX
The INOX series submersible drainage/sludge pumps are constructed of corrosion/chemical-resistant stainless steel.

  • 13-hp Master INOX pump has a 999-gpm maximum flow and a pressure head of 246 ft.
  • Cast parts made of stainless steel and can handle fluids with pH levels from 2 to 10
  • Suitable for tough applications in corrosive environments

Gorman Rupp Environmental Silent Pump
The PA6C60-4045T-ESP is suited for bypass pumping or any applications that require sound attenuation.

  • Provides flow rates up to 2,750 gpm and heads up to 200 ft.
  • Can handle 3-in. solids
  • Able to run dry indefinitely without damage
  • Environmental base contains all fuel and engine liquids that could otherwise leak onto the ground during an accident

1 2 next
E-mail This StoryE-mail Article Print This StoryPrinter Friendly