ForConstructionPros.com

Article

  

Products

Updated: July 8th, 2008 05:26 PM GMT-05:00

Equipment Gallery

Following is a roundup of products and services available to help you improve efficiency, productivity and safety on the jobsite.

Kesmac Truck-mounted Forklifts

These 4,000- to 5,500-lb.-capacity, truck-mounted forklifts feature an automotive-style forward/reverse control lever on the steering column for one-foot acceleration.
  • Inching pedal also acts as a brake on the hydraulic drive
  • Overhang of 45 in. behind forks
  • Fixed models mount partly under and partly behind truck or trailer platform
  • Retractable models are set off the back of trailers and carried on air-powered swing-out arms

    Kimble Concrete Mixers

    Kimble’s rear-discharge concrete mixers incorporate a chute hoist with a higher discharge point, enabling full utilization of the entire chute length.
  • Innovative flight design
  • Front and rear pedestal constructed of 80,000-lb. structural steel with urethane trunnion mounts
  • Charge hopper engineered with a higher loading point and more effective angle

    Cemen Tech Concrete Dispenser

    The Cemen Tech Concrete Dispenser makes fresh concrete when and where you want it with no waiting or waste.
  • Sizes range from 2- to 12-cu.-yd. capacities
  • Production ranges from 10 to 120 cu. yds. per hour

    Titan-by Miller T-FLEX Harness

    Bacou-Dalloz offers five models of the Titan-by-Miller T-FLEX Harness, featuring comfort-stretch webbing for maximum maneuverability and ease of wear.
  • Sub-pelvic and back straps for support and safety
  • Non-slip, adjustable chest strap, lanyard ring and sliding back D-ring/pad
  • Meets all OSHA, ANSI and CSA requirements

    Elkin Mobile Mixers

    Custom-designed Elkin mobile concrete mixers transport sand, aggregate, water, cement and admixtures to the jobsite where they are properly batched and mixed at the point of delivery to exact specifications.
  • Enable operator to adjust precise amounts of each ingredient
  • Auger housed in two-ply rubber trough that conforms to the auger
  • Designed to fit existing or new truck chassis
  • 1- to 10+-cu.-yd. capacities with hourly production rates up to 60+ cu. yds.

    AshRoss RUM Railcar Unloader

  • 1 2 3 4 next
    E-mail This StoryE-mail Article Print This StoryPrinter Friendly