ForConstructionPros.com

9000 Rubber Tire Paver

The 33,000-lb. 9000 paver features a heavy-duty, electrically heated and vibrating Legend Screed System that extends hydraulically from 8 to 15.5 ft. The 11-ton receiving hopper includes heavy-duty, hydraulic radius hopper wings and high-strength plastic flashing to prevent material spillage. Standard sonic feed sensors control the 16-in.-diameter hardened cast steel augers. A two-speed motor with single reduction planetary torque hub allows the paver to travel at speeds up to 13 mph, with paving speeds up to 250 fpm. Power is provided by a 173-HP CAT Tier III diesel engine.

Coneqtec/Universal BG Berm Grinder

The BG berm grinder features an offset design and a low-profile drum and housing that allow for berm removal while leaving the guardrail intact. The center-pivot design places the down force of the skid steer directly over the cutting drum. Side shift allows the cutting drum to reach under guardrails and obstructions past the skid steer's tires and retract to a compact transport width. Electric or hydraulic controls are available to operate side shift and tilt functions.

G5-18A

The 10,800-lb. JLG G5-18A provides a maximum lifting capacity of 5,500 lbs., maximum lift height of 18 ft. 4 in. and maximum forward reach of 10 ft. 10 in.

• Operator-selectable steering modes include four-wheel circle, four-wheel crab and two-wheel steering
• 126-in. turning radius and compact dimensions for maneuverability in confined or congested work areas
• Switch in cab allows the operator to choose between Lift Mode (joystick L/R moves boom in/out) or Loader Mode (joystick L/R tilts attachment up/down.
• 84-hp Perkins engine
• Available with several attachments and can be configured to accommodate skid-steer attachments

The 10,800-lb. JLG G5-18A provides a maximum lifting capacity of 5,500 lbs., maximum lift height of 18 ft. 4 in. and maximum forward reach of 10 ft. 10 in. Operator-selectable steering modes include four-wheel circle, four-wheel crab and two-wheel steering. A 126-in. turning radius and compact dimensions allow for maneuverability in confined or congested work areas. A switch in the cab allows the operator to choose between Lift or Loader Modes. The 84-hp unit is available with several attachments and can be configured to accommodate skid-steer attachments.

HS300 Submersible Pump

The 12-in. Heidra HS300 hydraulic-powered submersible pump is capable of flow rates to 6,000 gpm and heads to 200 ft.