ForConstructionPros.com

Take a look through the next couple of pages for the latest equipment available. You'll find a solid sampling of both new machines and models that have been recently revamped by the manufacturers.

John Deere 605C Crawler Loader*
The 99-hp 605C weighs from 23,600 to 26,650 lbs., and offers a 1.7-cu.-yd. heaped bucket capacity and 22,480 lbs. of bucket breakout force. Its dual-path, electronically controlled, closed-loop hydrostatic drive system delivers power management, infinite speed control, power turns, counter-rotation and dynamic braking. Other features include open-center, load-sense hydraulics, hydraulic pilot control, a transmission-only decelerator mode, bucket float, return-to-dig function and boom height limiter.

Stone Model RP1130 Reversible Plate*
The Model RP1130 delivers 11,240 lbs. of impact force with speeds up to 72 fpm, enabling productivity of over 8,500 sq. ft./hour with lifts of up to 27 in. Its patented three-shaft eccentric system delivers optimum force, a lower center of gravity and larger amplitude. A triple exciter system enhances the infinite hydraulic forward and reverse travel and on-the-spot vibration. The fully hydrostatic plate weighs 926 lbs., has a 24-in. working width and is powered by a 9.5-hp Hatz diesel engine.

Terex Site Dumpers*
Terex site dumpers offer payload capacities from 4,409 to 13,230 lbs., and are available in power tip or power swivel four-wheel-drive models or a straight tip two-wheel-drive model. Power tip units feature fully hydrostatic drive to all four wheels and are easily operated with a joystick control. Power swivel models allow loads to be rotated 180° from side to side and tipped to accurately place a load. All models feature ergonomically designed seats and controls and tilt-up engine hoods. Engines range from 22 to 82 hp.

Hobart Handler 187 MIG Welder
The Handler 187 industrial-grade MIG welder features a seven-tap voltage selection control that enables users to make arc adjustments in finer increments. Enhanced magnetic inductance provides better arc starts, smoother arc performance, less spatter and professional-looking weld beads. The 68-lb. welder has a welding output range of 25 to 185 amps. It operates on standard 230/240-volt power and accommodates a 4- or 8-in. spool of wire in .023 to .035 wire diameters.