ForConstructionPros.com

Wacker BTS 1140L3 Cut-off Saw
The 23.4-lb. BTS 1140L3 cut-off saw has a 16-in. blade diameter that offers a cutting depth of 5.7 in. Power is supplied by a 6.1-hp two-cycle engine. The L3 (Long Life Lubrication) piston is furnished with a special graphite surface coating to eliminate piston and cylinder overheating even during tough, continuous operations. A multi-ribbed belt delivers better power transmission to the cutting blade. Additional features include an operator-friendly air cleaning system, fingertip throttle control and a large double-wall nylon fuel tank.

Champion C60 C and C66 C Graders
The C60 C and C66 C graders feature a re-engineered front axle that allows a 50° steering angle left and right, a 15° improvement over previous models. The front axle has also been raised 6 in. for a 22-in. ground clearance. With the frame fully articulated, the single-axle machines can turn 360° within a 17-ft. 6-in. circle. Other features include a new moldboard and blade lift arrangement and a stronger mount for the articulation cylinder. Blade lift stance has been increased more than 35% to a full 4 ft. across.

Roadrunner Grading Blade
The Grading Blade features a serrated cutting edge that will penetrate and crumble hardpacked materials. Its rear blade remains a standard curved motor grader cutting edge. The attachment maintains its smooth leveling characteristics, operating on 5 1/2- or 6-ft. skid bars with heat-treated wear strips. The side panels eliminate windrows, and the twin blades operate on a slight angle to eliminate washboarding. The unit is available with twin screw jacks or optional hydraulic tilt.

Max USA AKHL1050E Power Lite
The 400-psi AKHL1050E Power Lite compressor is powered by a 2-hp DC brushless motor with inverter circuit that adjusts the rpm for maximum performance depending on the voltage level. Its triple fan cooling system provides efficient motor cooling. One side of the 51.7-lb. unit operates conventional 100-psi tools, while the other side allows operation of 400-psi Power Lite tools. A 2.6-gal. tank handles up to two tools per side. An aftermarket sub tank (AKTH5) is available to add more air capacity.

Volvo E-Series Articulated Haulers
The seven models in the E-Series cover capacities from 24 to 39 tonnes. All feature Tier III Volvo engines ranging from 305 to 476 gross hp. The A34E and A40E are available with the Full Suspension (FS), which provides automatic leveling and stability control on all wheels. Even when fully loaded, the units have the ability to float over rough ground without bouncing and rolling. All models are available with upgraded versions of the current suspension arrangement. The A35E, A35E FS, A40E and A40E FS also feature a fully automatic nine-speed fast adaptive transmission.