ForConstructionPros.com

AUSA T 204 Hx4 Compact Telescopic Handler
The Model T 204 Hx4 compact rough-terrain telescopic handler has a 4,400-lb. rated capacity with a 13-ft. 9-in. maximum lifting height. It is powered by a 53.9-hp Kubota water-cooled engine matched to a hydrostatic transmission. Continuously engaged four-wheel drive and three steering modes allow for maximum maneuverability. Features include a fork carriage with a 1,200mm width, rotating beacon, rear mirrors, ergonomic and adjustable operator seat, tiltable cabin, active safety equipment with stability warning device and auxiliary hydraulic PTO (4th hydraulic control).

Genie S-60 and S-65 Trax Telescopic Booms
These Trax telescopic booms feature a permanently fixed four-point track system that works with the active oscillation axle system and positive traction drive system to ensure maximum rideability and traction. With steering like a wheeled unit, plus an 11-ft. inside and 21-ft. outside turning radius, the units can easily maneuver near obstructions and on and off trailers. The S-60 has a 500-lb. lift capacity at a 50-ft. 10-in. maximum horizontal outreach up to a 66-ft. working height. The S-65 has a 500-lb. capacity at its 56-ft. 2-in. maximum horizontal outreach to a 71-ft. working height.

Kobelco ACERA Mark 8 Excavators
The SK295LC full-size excavator is powered by a Tier III-certified FPT turbocharged engine, and offers the Power Boost system for 10% more bucket breakout force on commaand. The 326-net-hp SK485LC provides four standard working modes, including Heavy Lift on command for 10% more lifting power without a time limit. Both models feature the Intelligent Total Control System (ITCS), which recognizes an operator's actions and assists with repeatability functions by providing progressive power for fine leveling and grading operations.

Chicago Pneumatic CP 0010 Submersible Pump
The 33-lb., 9-in.-diameter CP 0010 is suited for applications such as removing water from trenches, ditches, manholes and excavation sites. The 2-in., direct-driven, single-stage centrifugal pump discharges between 125 and 250 gpm and has a lifting head of up to 90 ft. It requires 100 cfm of air for operation. A cast iron housing and double-seal protection shield the motor and bearings from water and mud, while an integral strainer prevents debris from entering the pump. The unit does not require priming and can run continuously without risk of damage.

Champion C110 C and C116 C Motor Graders
Weighing in at roughly 24,000 lbs., the C110 C tandem-drive and C116 C all-wheel-drive mid-sized graders feature Cummins QSB6.7 Tier III-certified engines delivering 133 hp and 431 lb.-ft. of torque. Their fully sequential, direct-drive transmission offers eight forward/four reverse gears with a top speed of 27 mph. The hydrostatic all-wheel-drive system on the C116 C allows only the front wheels to be engaged up to 2 mph for optimum fine grading control. Both models are pre-engineered for an automatic blade control system, and offer various options and attachments.