ForConstructionPros.com

Subaru Robin Diesel Trash Pumps
The PTD310T has a 3-in. discharge port and a 317-gpm maximum capacity, while the PTD410T has a 4-in. discharge port and a 449-gpm maximum capacity.

• Self-priming
• 6.8- and 9.9-hp Hatz diesel engines with recoil starter
• Low-oil shutdown system
• Hardened cast-iron volute and abrasion-resistant, cast-iron impeller and replaceable wear plate

Grindex INOX Pumps
The INOX series submersible drainage/sludge pumps are constructed of corrosion/chemical-resistant stainless steel.

• 13-hp Master INOX pump has a 999-gpm maximum flow and a pressure head of 246 ft.
• Cast parts made of stainless steel and can handle fluids with pH levels from 2 to 10
• Suitable for tough applications in corrosive environments

ITT Flygt 2600 Series
The 2600 series includes six models with discharges from 2- to 6-in. NPT, heads from 40 to 230 ft. and power outputs from 1.2 to 27 hp.

• Hydraulic performance ranges from 150 to 1,400 gpm
• DuraSpin hydraulic system and high-chrome cast iron closed impellers provide improved wear resistance and durability
• Single screw enables fast, easy adjustments
• One-piece Plug-In seal with two mechanical seals for double protection against liquid penetration

ABS Pumps Submersible Electric Pumps
These fully submersible pumps feature a sealed motor design and double outer casting that enable them to run dry or in "snore" condition without damage.

• No priming required
• Wide base for soft bottom applications or slim centerline version for limited-space applications
• Sizes available to handle drainage volumes of 5,500 gpm
• Discharge connection sizes from 1 1/2- to 10-in. diameters

Honda WB Series
The 4.5-hp WB20 and 5.5-hp WB30 are powered by easy to start Honda OHV commercial-grade engines with Oil Alert.

• WB30 delivers a maximum discharge capacity of 275 gpm and a maximum head of 83 ft.
• WB20 discharges up to 153 gpm with a maximum head of 94 ft.
• Heavy-duty full frame protection
• Rigid-mounted cast iron pump volute