ForConstructionPros.com

Caterpillar Towed Scrapers
Four models of pull-type scrapers are available in 17- and 22-cu.-yd. capacities, and in standard two-wheel (E-17 and E-22) or advanced four-wheel design (E-17XW and E-22XW).

• Four-wheel models include a parallel linkage that enables the cutting edge angle to be adjusted for most efficient loading, plus a walking beam suspension for better ride quality
• Scraper ejection system speeds cycles and reduces carryback
• Center lift bowl design reduces overall scraper width for easier transport
• Designed to be pulled by Caterpillar track-type tractors or by MT800 Series and MT900 Series Challenger or other agricultural tractors

Hoelscher DB Series Scrapers
The "Dump Bowl" towable scrapers are available in 4-, 5- and 6-ft. cutting widths and can carry from .9 to 1.3 cu. yds. of material.

• Trunnion-style hitch and gooseneck frame provide for up to 90° turns with 30° of oscillation
• Material can be spread thin or stockpiled with full control of the bowl dump angle and blade height
• Segmented frost bit-style cutting edge
• Can be pulled behind a 35- to 50-hp tractor

Reynolds 20E12.5 Scraper
The 20-cu.-yd.-capacity 20E12.5 "ejector" pull-type scraper is suited for use with 375- to 500-hp tractors.

• Provides a 12.5-ft. cut
• Utilizes the SDS synchronized ejector system
• Hydraulic manifold with integral valves control all scraper functions
• Reversible heat-treated alloy blades and wear-resistant cast bits
• Incorporates a tandem hitch and hydraulics, adjustable yoke hitch, height-adjustable axle mounts and laser bracket

John Deere Scrapers
All 10 construction-grade ejector or carryall pull-type scrapers are built to maximize production, profit and uptime.

• Cut widths from 10 to 14.5 ft. with 15- to 21-cu.-ft. heaped capacities
• AutoLoad option automates the hydraulic-lift function by varying the blade height to maintain consistent loads and cut profiles
• Can be pulled with 425- to 530-hp John Deere Scraper Special 4WD
• tractors featuring heavy-duty frames and axles and 18-speed PowerShift transmissions

Ashland CS18-HD Carry-all Scraper
The 18-cu.-yd.-capacity CS18-HD is suitable for use with 325-hp+ rubber-tracked or wheeled tractors.

• 23.5 x 25 E3/L3 12-ply tires, lower ground pressure and longer rolling radius for optimum flotation and ease of operation in marginally wet or clay soils, sandy loams or dry topsoil
• Higher mounted lift cylinders keep dirt and rocks out
• Designed to keep loose material from escaping around sides while directing it into a 12-ft.-wide cut

Miskin AirScraper