ForConstructionPros.com

Article

  

Features

Updated: July 8th, 2008 05:26 PM EDT

Site Preparation & Earthmoving

Shannon Chastain 601
Shannon Chastain 601
JCB 3CX Backhoe-loader
JCB 3CX Backhoe-loader
Gehl 7810E Skid Loader
Gehl 7810E Skid Loader
Champion C80 C and C86 C Graders
Champion C80 C and C86 C Graders
Skid Steer Cold Planers
Skid Steer Cold Planers
MT-2000 Milling Machine
MT-2000 Milling Machine
Trimble Site Controller
Trimble Site Controller
New Holland Crawler Dozers
New Holland Crawler Dozers
BOMAG Cold Planer
BOMAG Cold Planer
Mustang 2044 and 2054 Skid Steers
Mustang 2044 and 2054 Skid Steers
Komatsu Dash-5
Komatsu Dash-5 Compact Loaders
Wirtgen W 2200
Wirtgen W 2200 Cold Milling
Roadtec RX-900 Cold Planer
Roadtec RX-900 Cold Planer
BMP 6000 Electric Milling Machine
BMP 6000 Electric Milling Machine
Case B Series Compact Excavators
Case B Series Compact Excavators
John Deere 344J Compact Loader
John Deere 344J Compact Loader
Gradall XL 4300-II
Gradall XL 4300-II
Bobcat High-Flow Planer
Bobcat High-Flow Planer
Asphalt Zipper AZ-500
Asphalt Zipper AZ-500

By Pavement Staff

Shannon Chastain 601

  • Hydrostatic grader, 8-ft. x 16-ft. moldboard, 2 ft. side shift and blade tilt
  • 45° front wheel power steering
  • Articulates 22° left or right of center
  • Dozer blade and scarifier

Shannon Chastain Enterprises

JCB 3CX Backhoe-loader

  • 15,439-lb. 3CX has fully adjustable, seat-mounted Precision Controls System, which enables use of the machine from a non-rear facing position
  • 14-ft., 7-in. backhoe dig depth standard with a 12,023-lb. bucket breakout force

JCB

Gehl 7810E Skid Loader

  • 3,850-lb. SAE-rated load capacity and 8,340 lbs. of bucket breakout force
  • Auxiliary hydraulic system provides 29-gpm adjustable flow and up to 41 gpm with optional high flow
  • 2-speed drive, ground speed to 12.5 mph
  • 55-in. wheelbase

Gehl

Champion C80 C and C86 C Graders

  • Redesigned front axle provides 50° of steering angle left and right
  • 25-ft. straight frame turning radius with a 19-ft. radius when fully articulated
  • 21-in.-high moldboard offers 4-ft. blade lift stance for increased featherability

Champion Motor Graders

Skid Steer Cold Planers

  • Rated for systems with output up to 42 gpm at 5,000 psi.
  • Driveline is submerged within the chassis, eliminating the possibility of damage and increasing side clearance.
  • Cutting widths: 16, 18, 24, 30, 40 inches
  • Zanetis Power Attachments, Indicate 298 on inquiry card

MT-2000 Milling Machine

1 2 3 4 next
E-mail This StoryE-mail Article Print This StoryPrinter Friendly