ForConstructionPros.com

Roadtec Milling Machines

• Models RX-500, RX-700 and RX-900
• Half-lane to full-lane milling widths
• Cut widths range from 2 ft. to 13 ft. 6 in.
• Maximum cut depth is 14 in.
• Three- or four-track versions
• Two spray bars in cutter drum housing for better dust control and tool cooling

Dynapac PL2000 S

• 80-in. cutting width
• Water system keeps drum cool, reduces dust levels, cleans bits
• Four control panels on left and right enable monitoring/controlling planing from ground level or from operator's platform

Utility-class milling

• MW-500 is a four-wheel, rear-loading, utility-class milling machine
• For patching, trench and shoulder milling
• 30-in. diameter drum offers maximum cutting depth of 8.25 in. with a standard 20-in. cutting width
• Tight 7-in. cutting radius comparable to many three-wheel machines
• All-wheel-drive, anti-slip control standard

Volvo-Ingersoll Rand

BOMAG Cold Planer

• BM1000/30 and BM1300/30 feature centrally mounted cutting drums
• Allows precise milling next to walls, curbs and other obstructions
• 39.6- and 51.4-in. standard cutting widths, depth to 12.6 in.
• "Over-the-cut" operator's position, sliding seat ensure better jobsite visibility

Bomag Americas Inc.

Backhoe Mill Attachment

• For pavement cuts for utility access or culvert replacement
• Attaches to most backhoe-loaders in minutes using the same pin size and spacing as the bucket
• 24-in.-wide cutter provides a 12-in. maximum cutting depth and is powered by the carrier's auxiliary hydraulic connection

Maddock