







Masco Sweeper for Pick-ups
Masco Sweepers Model 2200 with stainless steel hopper sweeper is designed to slide into a contractor's pick-up truck, converting any pick-up to a sweeper. This gives you the advantage of multiple uses for your trucks. The Model 2200 sweeps quiet, fast and picks up all parking lot debris. The manufacturer also offers the Model 1600 QT low-noise, low-dust, high-performance sweeper that can sweep in parking garages with less then 6-foot, 5-inch clearance.
IR Versatile Titan 7820 Paver
Ingersoll Rand Co. extends its line of asphalt and concrete pavers with the Titan 7820 paver, designed for placing any kind of wearing, binder, and base course material in large paving widths and thicknesses. It's ideal for highways, secondary roads, airports, landfills, and railway beds. The Titan 7820 has a hopper capacity of 14.8 tons, a 231-hp Duetz diesel engine provides variable speed control up to 65 fpm when paving and 2.2 mph in transport. The traction drive is electronically controlled.
BLS Poly Bolt-on Track Pads
Available for pavers including Bomag/Gilcrest Propaver 813; LeeBoy 8500, 8815, 8816; Mauldin 1550; Roadtec RP 185; and Barber Greene/Caterpillar BG 225, 245, BLS Poly Bolt-on track pads reduce labor by 50% with easy access to lock nuts and no need to spend time cleaning debris from bolt holes. Replace only the polyurethane pad and reuse the predrilled steel triple grouser for savings of 25% to 35% on future replacement parts.
Titan 9900XLT
Enables Ride-on
The Model 9900 is part of Titan Tools' XLT Series of five hydraulically powered, airless Speeflo PowrLiners. Standard on the 9900 is the lightweight PowrHandler ride-on with non-skid deck, which along with 8-hp Honda overhead valve engine, enables striping at 880 linear ft./minute at up to 10 mph.
"Mule" Asphalt Discharge Trailer
"The Mule" 28-foot-long, 76-inch-wide, horizontal asphalt discharge trailer relies on Travis Body & Trailer's patented "Wave" body design and features a dual-walled, smooth-sided aluminum trailer. The Mule discharges hot mix into the paver or transfer vehicle using a Walking Floor® system made by Keith Mfg. Co. The maneuverable, 4-axle trailer weighs 10,998 lbs., about 3 tons less than a 42-foot belt trailer. This results in a typical payload of 27 tons.