ForConstructionPros.com

BPR35/60 Series

Bomag introduces two compact-size reversible plate compactors that offer faster working speeds and greater compaction forces as well as fully enclosed engine protection hoods. The series includes two models: the BPR35/60 features a 5.4-hp Honda air-cooled gasoline engine, while the BPR35/60D offers a 4.16-hp Hatz air-cooled diesel engine. Both models feature a new vibratory exciter design that gives them a 23-percent faster working speed. Both offer a 13-percent increase in centrifugal force. Maximum vibration frequency is now 4,800 vpm, a 6-percent increase over previous models. Heavy-duty wear-resistant base plates feature reinforced edges and have a working width of 23.6 in. Like all Bomag reversible plates, the BPR35/60 series features a high-strength, grain-refined steel hood.

BOMAG Americas

BS-2i Rammer

The BS-2i two-cycle rammer series features a new look that includes a change from the familiar green bellows and silencer cover to gray bellows and a yellow silencer cover.

• Advanced injection system
• Updated engine cylinder lowers total emissions by 38% and reduces fuel consumption by 15%
• Low-profile, integrated muffler enables compaction closer to structures, while protecting against damage
• Three models weighing from 131 to 164 lbs. and featuring reduced hand-arm vibration, integrated fuel valve and throttle lever and optimized weight balance

Wacker Neuson Corporation

CR 6, CR 7 and CR 8 with COMPATROL-MSM

The CR 6, CR 7 and CR 8 are available with COMPATROL - MSM, a machine and service management system for soil compactors rated above 11,000 lbs. of centrifugal force.

• Monitors battery voltage, engine oil pressure, temperature and speed, air filter restriction, vibrator frequency, hours of use and operating hours until next inspection
• Machine operating weights from 917 to 1,240 lbs.
• Centrifugal force from 11,240 to 16,250 lbs. with frequencies from 3,750 to 4,350 rpm
• 10- or 11-hp Lombardini (CR 6 and CR 7) and 15-hp Hatz (CR 8) diesel engines