The T Meter is the industry's first measurement device for reading concrete surface texture.
Reads concrete texture in three parameters: STG – Surface Texture Grade as described in CSDA Standard ST-115, Ra – Roughness Average, and CSP – Concrete Surface Profile 1-6 as defined parameters of ICRI CSP profiles
StoneEdge is a polishable tinted grout coat that also accepts polishing dye. When used properly, it increases reflectivity by filling air voids, small pop outs and pitted areas in finished concrete and terrazzo floors.
Polished Concrete Solutions' Triangle Polish/Grinding Pad can be used dry or wet for concrete polishing.
3-in. Triangle Resin Diamond Polishing Pads: velcro backed; use on FEIN tools for detail polishing of granite, marble, concrete and other types of stones; available in 120, 220, 400, 800, 1800 and 3000 grits
The Easy Edge Ceramic Cupwheel is designed to improve the quality of edge work while reducing the gouging that metal bond cup wheels can cause. The Easy Edge system will eliminate metal bond cup wheels on most wet or dry concrete polishing projects.
Use ARDEX PC 10 as part of the ARDEX PC-T Polished Concrete Topping System or with other ARDEX Engineered Toppings to make an extremely dense, durable hard surface that resists dusting and wear. When used with resin phenolic diamonds, ARDEX PC 10’s advanced chemistry creates a surface with higher reflectivity, longer life and lower maintenance costs.
ARDEX PC 50 Lithium Densifier is an economical, cost effective chemical treatment used to enhance the grinding and polishing process (metal and resin-bonded abrasives) of architectural polished concrete surfaces. ARDEX PC 50 rapidly produces a harder, denser surface that is easily profiled and polished.
Use ARDEX PC FINISH High or Low Gloss on newly polished concrete, colored concrete, concrete toppings and for restoring existing surfaces. This reactive micro-impregnating SiRE™ (Silicon Reactive Lithium) polymer gives surfaces higher gloss and increased abrasion and stain resistance while lowering maintenance costs.