- Variable axial piston pump
- Increased efficiency, lower noise generation and improved controllers
- For the upper medium-duty range
- Available in nominal sizes 71 to 140 and with a nominal respectively maximum pressure of 4,000/5,000 psi
- Offers greater resistance to suction-pressure dips and housing-pressure peaks, permits higher rotational speeds, and is optimized to resist dirt and contamination
- Can supply most of the nominal sizes offered with either a two- or a four-hole flange
A10VO 32 Series
From Bosch Rexroth Corp.
Product From Bosch Rexroth Corp.
Expand for more details on this Product
- Product From Brennan Industries Inc.
The Stainless steel O-ring face seal and flange adapters offer corrosion resistance and sealing for critical, harsh-duty applications such as extremely high working pressures and tensile strength. The face seal fittings a designed to eliminate leaks in hydraulic systems while permitting operating pressures as high as 6,000 psi.
- Product From Reid Supply Company
- Air guns and accessories
- Filters and regulators
- Couplers and connectors
- Air cylinders
- Tie rod cylinders
- Air fittings
- Vacuum ejectors
- Hose clamps
- Air products
- Hydraulic hoses
- Pneumatic cylinders
- Product From PIRTEK
Pre-assembled replacement hydraulic valve blocks feature quick-disconnect couplings and a pressure relief valve for safe relief of hydraulic pressure before connecting/disconnecting attachments.
- Simple to use and replace
- Product From Parker Hannifin Corp
The 150cc and 250cc F12 Series bent-axis, fixed-displacement hydraulic motors are suited for heavy-duty applications that require high-speed motors.
- Lightweight pistons and sturdy timing gear design facilitate quick acceleration/deceleration without damage
- Product From Eaton Corporation
The 620 Series compact piston-type open circuit pumps incorporate the latest technology for moderate flow, high-pressure applications.
- Rated at 4,061 psi (280 bar) and 2,200 rpm with a displacement of 6.0 cu. in./revolution
- Product From MICO Inc.
These hydraulic-over-air relay valves are designed to convert hydraulic modulated input pressure to a proportional output air pressure.
- Single input design provides one hydraulic pilot port to control modulated air braking pressure
- Product From Eaton Corporation
A hydro-mechanical torque control option and several performance upgrades have been added to the 420 open-circuit piston pump line.
- Hydro-mechanical torque control automatically senses heavy loads and adjusts hydraulic fluid flow accordingly
- Product From Snap-Tite - Quick Disconnect & Valve Division
The QUIKXCHANGE quick-connect hydraulic coupling system mounts easily and enables one person to change excavator work tool hydraulic lines in five minutes or less with minimal effort.
- Designed to withstand the demands of medium and large excavator work tools such as breakers, shears and crushers
- Product From Kurt Hydraulics
Kurt Hydraulics offers four styles of hose protection products including the spring wire guard, spiral steel wrap, nylon sleeve guard and spiral poly wrap.
- Designed for use in rugged operating applications to stop premature failure due to wear, abrasion and deep cuts
- Product From HKX Inc.
The Active Control Technology (ACT) provides advanced control of auxiliary oil flow, pressure and direction to attachments, as well as supporting components such as quick couplers.
- Offers up to 50 attachment settings, giving excavators the flexibility to perform practically any task