- Cold-applied, low modulus horizontal joint sealant
- Provides a cost-effective alternative to hot-applied sealants
- Delivers reliable, consistent performance even during cold weather or after repeated freeze/thaw cycles
- Remains pliable in the joint for years
Sof-Seal
From W.R. Meadows Inc.
-
Product From W.R. Meadows Inc.
-
-
Expand for more details on this Product
- Product From Pavemade LLC
-
Pavemade's PM Leak Guard solves the common problem of asphalt leaking at the start and end of runs.
- LeakGuard is easy to install and operate on any existing push melters
- 15 second single bolt installation
- Product From Pavemade LLC
-
Mini melters are portable, easy to setup, zero maintenance asphalt cracksealing machines.
- Ideal for on site quick job
- Available in 30 gal. stationary model and a 10 gal. mobile model
- Optimize heat transfer pathway for the melter interiors so you have your asphalt heated and ready to go faster
-
Crack Pro Melter / Applicators
Product From SealMaster -
The Crack Pro Melter/Applicators is designed for hot pour crack sealing.
- 125-, 200- and 400-gallon capacities
- Burner and engine are fueled by diesel fuel
- Oil-jacketed melter/applicator
- Product From Crafco Inc.
-
The Roadsaver Crack Sealant from Crafco Inc is a hot-applied crack sealant that is said to outperform cold-pour sealers.
- No double-boiler expense
- Designed to not track or bleed through
- Bonds to asphalt or concrete
- Product From Cimline Pavement Maintenance Group
-
Cimline's Magma Generation IV cracksealing unit is available in 150-, 230- and 410-gal. sizes with an AutoStart feature that informs operators when the unit is ready to seal. Cimline says its sealant wand has a "no-drip" feature: a special ball valve intended to eliminate drips between cracks.
- Product From Tensar International Corporation
-
Endurablend Crackfill is engineered to provide an alternative to traditional crackseal beneath overlays or surface treatments.
- High flow polymer cement slurry
- Hardens to form a semi-rigid, stable material even at high temperatures
- Product From LAB Manufacturing
-
The Stinger, from LAB Manufacturing is a self contained heat lance on wheels. The unit is a one person operation, ideal for the medium to small pavement maintenance contractor. Complete with electronic ignition and stainless steel burner and regulator, the unit has a 25-ft. hose kit that makes for easy access to cracks or the lance can be maneuvered in its holder.
- Product From Quik Pave Products, Inc.
-
QuikFill
- Fills and seals cracks, joints, and imperfections in asphalt and concrete pavements
- Requires no special tools
- Minimal clean-up, no mess
- Heat-melt dry particles to create fill for cracks and depressions
- Product From Brewer Cote - Southwest
-
The Qwikfire Cracksealant Melter features a gravity flow melter with 8-hp electric start Briggs & Stratton engine and hydraulic controls.
- Oil-jacketed system allows heat-up time in less than an hour
- 46-in. sealant loading deck, bolt-on lid designed for easy cleaning and agitator service, and a sealed agitator shaft designed for low maintenance
- Product From SandLiner
-
- Reach 15 to 20 in. wide
- Produce consistent, even results
- Handheld, the Beader makes use simple and quick
- Nothing to attach to or adjust on the striping machine
- Spread an even 4- to 5-in. line
- Also use to sand cracksealing material