Eaton UltraShift PLUS Automated Transmissions

Enhancements allow for transmission gear selection and clutch control outside of a vehicle’s cab

November 8, 2011

Eaton Corporation

Westernstar Ultrashift H 10448686

The expanded lineup of UltraShift PLUS automated transmissions for vocational applications offers enhanced split shaft power take-off (PTO) capabilities. The enhancements now allow for transmission gear selection and clutch control outside of a vehicle’s cab.

Allow for the use of all transmission gear ratios for PTO minimum and maximum drive gears
Self-adjusting electronic clutch actuation for fast, smooth engagements
Hill Start Aid feature prevents rolling while on steep grades and allows for smoother vehicle launches
Automatic, manual and low mode selections offer drivers better control
Creep feature for significantly improved maneuverability with continuous low-speed control
Six- and eight-bolt as well as thru-shaft power take-off options
Oil sight glass allows for easy fluid level checks

Eaton Corporation

Fill out the form below to request more information about Eaton UltraShift PLUS Automated Transmissions

Both the trailer-mounted designs and the work truck upfits allow for the transport of bulk diesel and other daily fluids without requiring the driver to have a HAZMAT endorsement on their license and may also not require a CDL (depending on the combination of truck and trailer).

The New Age of Mobile Fuel & Service

The field fueling and service landscape has evolved to a place where contractors should feel empowered to control more of the sourcing and distribution of critical daily fluids and service needs.

Knowing how often the crane will be lifting, what will be lifted, how much weight needs to be lifted and how much reach is required will help operators select the type, length and capacity of the crane.

Building a Mechanic Truck That Works for You

The ideal truck will maximize on-location maintenance and repair.

Each Hard Rock Body has a total volumetric capacity of 23.9 cu. yd., an increase over the OEM body capacity of 19.6 cu. yd.

Philippi-Hagenbuch Unveils Custom HiVol Hard Rock Body for Haul Trucks

Each Hard Rock Body has a total volumetric capacity of 23.9 cu. yd., an increase over the OEM body capacity of 19.6 cu. yd.

The HT 160 SLD 3 Hooklift highlights performance with a 10% reduction in dead weight while maintaining a consistent lifting and tipping capacity of 16,000 lbs. at 36-in. hook height and 18,000 lbs. at 54-in. hook height.

PALFINGER Offers HT 160 SLD 3 Telescopic Hooklift

The HT 160 SLD 3 Hooklift highlights performance with a 10% reduction in dead weight while maintaining a consistent lifting and tipping capacity of 16,000 lbs. at 36-in. hook height and 18,000 lbs. at 54-in. hook height.

Accelera Announcement Resized 64fb901d2a96e

Cummins, Daimler Truck & Paccar Form Joint Venture to Advance Battery Cell Production in US

The partnership will manufacture battery cells for electric commercial vehicles and industrial applications and create jobs. Total investment is expected to be in the range of $2 billion to $3 billion for the 21-gigawatt hour factory.

Guide to Toolbox System Configuration for Mechanic & Service Trucks

Guide to Toolbox System Configuration for Mechanic & Service Trucks

Discover how to elevate construction efficiency with the ultimate toolbox system guide! Find your perfect match for higher productivity.

This solution allows operations to haul the full rated capacity with each load and reduce downtime associated with removing carryback from the truck.

Philippi-Hagenbuch Load Ejector System for Haul Trucks

This solution allows operations to haul the full rated capacity with each load and reduce downtime associated with removing carryback from the truck.

Reading Truck’s new Contractor Body comes equipped with many features, including A60 galvannealed steel construction, e-coat primer and powder coat finish.

Reading Truck Unveils Contractor Body for Work Trucks

Reading Truck’s new Contractor Body comes equipped with many features, including A60 galvannealed steel construction, e-coat primer and powder coat finish.

The first determination to make is whether the water affecting the vehicle was salt water or fresh water. If it was salt water, you’ll need to immediately begin replacing parts due to its extreme corrosivity.

After a Flood: Tips for Tractor, Trailer Inspection, Reconditioning

The devastating floods in Florida resulting from Hurricane Ian will require massive relief and rebuilding efforts, many of which depend on the trucking industry and thousands of truck drivers.

Mack Truck In Quarry

Trucking Trends Lead the Fall Show Season

Mack Trucks and Grote Industries recently launched two technology-driven products that fit right in to top trends for the construction and trucking industries.

These second generation tires have a new tread compound to increase mileage, chip and chunk resistance and protect the casing to allow for multiple retreads. Continental will be phasing out the first generation General Grabber OA and OA WB tires.

Continental Rolls Out 2nd Gen General Grabber OA Tires for Construction Vehicles

These second generation tires have a new tread compound to increase mileage, chip and chunk resistance and protect the casing to allow for multiple retreads. Continental will be phasing out the first generation General Grabber OA and OA WB tires.

Guide to Toolbox System Configuration for Mechanic & Service Trucks

Guide to Toolbox System Configuration for Mechanic & Service Trucks

Discover how to elevate construction efficiency with the ultimate toolbox system guide! Find your perfect match for higher productivity.

I-Torque comprises the D13 Turbo Compound (TC) engine, the I-Shift with overdrive features, adaptive gear shift strategy, a new map-based version of the predictive cruise control Volvo I-See and low rear axle ratios as low as 2.15.

Volvo I-Torque Powertrain

I-Torque comprises the D13 Turbo Compound (TC) engine, the I-Shift with overdrive features, adaptive gear shift strategy, a new map-based version of the predictive cruise control Volvo I-See and low rear axle ratios as low as 2.15.

The NXT18 is an 18,000 lb. capacity hoist, built for a class four through seven chassis. Manufactured in the U.S., this product is the first telescopic hooklift in the new NXT Series.

Stellar Unveils New Telescopic Hooklift

The NXT18 is an 18,000 lb. capacity hoist, built for a Class 4-7 chassis. Manufactured in the U.S., this product is the first telescopic hooklift in the new NXT Series.

Available with an optional ladder that gives owners quick access to their gear, the DECKED Tool Box fits most full-size pickup trucks from the 2001 model year forward.

DECKED Tool Box with Integrated Ladder

Available with an optional ladder that gives owners quick access to their gear, the DECKED Tool Box fits most full-size pickup trucks from the 2001 model year forward.

The Fuel Max RSA and the “Electric Drive Ready” Endurance RSA ULT are designed to meet demand trends within the last-mile delivery segment driven by e-commerce, as well as fleets’ cost-savings and sustainability goals.

Goodyear Offers New Tires for Fleets

The Fuel Max RSA and the “Electric Drive Ready” Endurance RSA ULT are designed to meet fleets’ cost-savings and sustainability goals.

New off-highway kits are available for most popular transmissions, including the Spicer T12000 series as well as T13/TE17 and TE27/32 series transmissions.

Dana Launches Spicer Off-Highway Transmission Service Kits

New off-highway kits are available for most popular transmissions, including the Spicer T12000 series as well as T13/TE17 and TE27/32 series transmissions.

Designed for turf, golf and work vehicles, the battery can be fully charged in less than eight hours and has a charging temperature range of -10°C to 50°C.

Briggs & Stratton Offers Vanguard 7 kWh Battery

Designed for turf, golf and work vehicles, the battery can be fully charged in less than eight hours and has a charging temperature range of -10°C to 50°C.

Designed for trucks operating both on and off highway, the HAULMAAX EX suspension features an equalizing beam that distributes the load equally between both axles in off-road and uneven terrain conditions.

Hendrickson Launches Rubber Suspension with Mack Trucks

Designed for trucks operating both on- and off-highway, the HAULMAAX EX suspension features an equalizing beam that distributes the load equally between both axles in off-road and uneven terrain conditions.

Some benefits offered by a lifted truck equipped with larger tires include increased visibility, along with needed ground clearance, both of which reduce risk of damage to the undercarriage.

Pickup Truck Lift Kit Can Help Reduce Damage on Construction Sites

Some benefits offered by a lifted truck equipped with larger tires include increased visibility, along with needed ground clearance, both of which reduce risk of damage to the undercarriage.

Adobe Stock 244469568 628fd39b2df97 Tech Metamorworks

Meritor to Buy Siemens Commercial Vehicles Business

Cummins consented to and is supportive of Meritor's agreement and completing the acquisition of the Siemens Commercial Vehicles business.

Mack Md Series

Mack Pushes Beyond Medium-duty Boundaries with New Allison Transmission Option

New transmission option will enable Mack MD Series trucks to take on heavier-duty applications that require increased power and vehicle weight ratings. plus utilize a live power PTO.

Bendix’s training program continues in 2022 with in-person and virtual training opportunities – along with a new testing option for each – for fleet technicians, owner-operators, and others to enhance the skills necessary for keeping vehicles on the road and in safe operating condition.

Bendix Announces 2022 Technical Training Sessions

Air Brake and Advanced Technology Training Courses Will Visit 11 States for In-Person Learning; Virtual Air Brake Training Classes and New Testing Option Also Available.

PACCAR adds the TX-18 and TX-18 Pro automated transmissions to the family of PACCAR TX transmissions.

PACCAR Rolls Out TX-18 and TX-18 Pro Automated Transmissions

These transmissions are designed to exclusively work with the MX-11 and MX-13 engines used in vocational applications including heavy haul, dump truck and cranes.