ForConstructionPros.com

• Adds up to 180° peripheral awareness
• Lightweight, adjustable mirrors clip easily to the brim of most hard hats and do not hinder forward vision
• Made of industrial-grade, non-conductive plastic
• Scratch-resistant and tinted to prevent glare
• "Breakaway" system allows individual parts to safely separate from each other in the event of a hard impact
• Meet ANSI and Washington Administrative Code 296-155-305 standards

Neuwaukum Industries Inc.

HD+ 120 and HD+ 140 Rollers

The HD+ 120 and HD+ 140 rollers - the first of the HD+ line - are articulated tandem rollers, with respective operating weights of 13.2 and 15.4 tons, and respective drum widths of 78 and 84 inches. Available in three models: the HD+ 120 or 140 VV, with conventional vibration in both drums; the HD+ 120 or 140 VO, with vibration in the front and exclusive Oscillation compaction in the rear; and the HD+ 120 or 140 VV HF, offering high-frequency vibration to 4,020 vpm. Frequency and amplitude can now be controlled independently on either drum, providing increased flexibility in the roll train. Amplitude and frequency adjustment on the HD+ models can be done by the operator on the dashboard. New on the HD+ models is the ability to pivot both the seat and the console across the full width of the big HD+ platform, for much better control and visibility, particularly to the drum edges. Also unique is the HD+ Series' offset capability, which is close to 7 inches. That means an operator can keep the front drum on the hot material and offset the rear drum so it can bridge between the pre-compacted hot material and the cold joint, potentially saving a pass for higher productivity, and avoiding travel in the other lane of traffic, for enhanced safety. New drum edge lights are now standard on the Hamm HD+ Series. Halogen lights mounted on the ROPS are available either in a four-light or six-light configuration. A xenon light option on the ROPS for those markets with this requirement also is available for use where it's specified.

Hamm Compactors Inc.

Melter/Applicator

Cleform's new 10-gal. melter/applicator for crack filling can be used for hot or cold pour crack filling. The melter is mounted on steel wheels and equipped with a spring loaded, hand controlled release valve and steel screed. The melter/applicator comes with burner assembly, hose, regulator, and temperature gauge.

Cleform Tool Corp / Gilson Mixers

Morse

Emerson Industrial Automation offers the new Morse high-speed conveyor backstop (CB-HS) clutch product line.

• Design allows users to reach previously unattainable line speeds, in sizes ranging from 7,000 to 722,000 ft-lbs.
• Full complement of anti-rollover cams and dual ball-bearing support, which creates a smoother-running clutch and lowers the overrunning drag torque and temperature, to help improve energy efficiency
• Purgeable grease chamber and a labyrinth path, to help keep contaminants out and grease in