ForConstructionPros.com

The decision to purchase a new Gencor Ultra 400-tph plant for the Petal location was based on the company's past experience.

"We have a 300 Gencor plant at our Laurel facility and we moved a Gecor 400-tph plant to Birmingham (operated by Dunn Roadbuilders' sister company, Dunn Construction Co.) after we (Dunn Roadbuilders was formerly the Bush Construction Co.) were purchased by Dunn Investment Co.," notes Graham. "So we've had a good working history with Gencor and we like the way the plants perform."

Plant installation
In December of 2006, Dunn began dismantling the old plant and installing the new Gencor Ultra plant, which consist of:

• Seven Gencor 10' x 14' skidded cold feed bins with 30" x 7' 6" feeders, eddy current drives, bin dividers, 30-inch collector conveyor and full bulkhead and wing walls
• 5' x 12' single-deck aggregate vibrating screen
• 30" x 50' access conveyor
• Gencor 450-tph skidded lime pugmill system with water metering system
• 30" x 70' aggregate scale conveyor
• Ultradrum Model 400 with ½-inch shell, special ceramic abrasion package, double pump AC metering system and Gencor's patented Volatile Reclaim System
• Gencor Ultra II-135 oil/gas
• burner
• Primary collector with gravity return
• Ultraflo Model CFS-151, 74,092-cfm skidded baghouse with 15,059 square feet of cloth, and 490-BCS exhaust fan with 200-hp variable frequency drive
• 14-inch auger dust return system with calibration port
• Gencor 12' x 40' skidded operator's control center with BC-250 process control, Gen 3D digital burner control, phone modem and full manual backup control console.
• HyWay HYCGO-200 hot oil heater and expansion tank

On March 14, 2007, the plant was fired up and the facility produced 125,000 tons in the first nine months of operation.

"We've been running the plant at about 310 to 320 tph with the burner operating at about 55 percent of capacity when the moisture content is at or under five percent, and we've been able to sustain the tonnage output without increasing the burner output" says Bradford.

"There have also been days when we were operating the plant at 425 tph," Graham adds. "And we've also been able to increase our RAP (reclaimed asphalt pavement) content, which will generate significant savings with more DOT projects allowing increased RAP content."