ForConstructionPros.com

• Operator's station rises for normal operation and lowers to reduce overall transport height to just 122 in.
• 56-in.-diameter standard universal rotor with 224 cutting teeth
• Hydrostatic rotor drive with integrated overload protection and rotor speeds from 90 to 130 rpm selectable under load
• All-wheel hydrostatic drive system with electronic traction control
• Articulated frame and rear-wheel steering provide a 148-in. inside turning radius

BOMAG Americas

MT2000 and MW500

Volvo Construction Equipment

PL2000S

Dynapac USA, Inc.

PM200

The 64,386-lb. PM-200 half-lane cold planer performs controlled full-depth removal of asphalt and concrete pavements in a single pass.

• 83-inch cutting width and 12-inch cutting depth
• Caterpillar C18 Tier III-compliant engine with ACERT Technology
• Dual operator station
• Front-folding conveyor with hydraulic control
• Two propel speeds with three electronic speeds
• Four-mode steering
• Optional automatic grade and slope control

Caterpillar Inc.

Poly Bolt-On TUFPADS HIGHTOP Track Pads

BLS's new polyurethane bolt-on track pad is specifically designed for asphalt milling machines. The pad has 50% more wear material than the standard. The pads are available in 14 and 16 in. and are also available as TUFPADS BLUES track pads with th enew extreme blue polyurethane.

BLS Enterprises, Inc.

RoadHog Milling Attachments

Zanetis Power Attachments

RS445C Reclaimer/Stabilizer

The 59,000-lb. RS445C reclaimer/stabilizer features hydrostatic planetary drive at each wheel for true four-wheel drive.