Upgraded Grading Blade

December 5, 2012

Roadrunner Construction Equipment

Upgradedgradingblade 10080052

Improvements to the grading blade include lowering of the mounting plate to facilitate opening the cab door, eliminating the trip bar on the skid-steer mounting plate and adding a step to ease entry to the cab.

Heat-treated wear pads added to corners of skid bars for extended life
Operate on 5 1/2- or 6-ft. skid bars
Side panels eliminate windrows
Twin blades operate on a slight angle to eliminate washboarding
Optional serrated cutting edge

Fill out the form below to request more information about Upgraded Grading Blade

With a working width of 60 in., the disc mulcher is purpose-built for 75- to 132-hp skid steers and compact track loaders that operate with 30 to 50 gallons per minute (gpm) of auxiliary hydraulic flow.

Fecon Disk Hawk Compact Mulcher

With a working width of 60 in., the disc mulcher is purpose-built for 75- to 132-hp skid steers and compact track loaders that operate with 30 to 50 gallons per minute (gpm) of auxiliary hydraulic flow.

Mini excavators are ideal for clearing, grading and applying fill material to prep pathways with minimal disruption.

4 Money-making Ideas for Your Excavator

Start the new year on the right foot by prioritizing equipment use that will benefit your work and bottom line.

Bobcat also expanded its product offerings to include various components, including hydraulic tilt couplers and mechanical pin grabbers for excavators, as well as more laser-guided technology offerings.

Bobcat Expands Attachment Line

Bobcat also expanded its product offerings to include various components, including hydraulic tilt couplers and mechanical pin grabbers for excavators, as well as more laser-guided technology offerings.

Designed for compact tractors and loaders, the new attachments include a multi-purpose rake grapple and stump bucket grapple.

Ignite Introduces New Grapple Attachments

Designed for compact tractors and loaders, the new attachments include a multi-purpose rake grapple and stump bucket grapple.

The new products include a low-flow mulcher, stump grinders, angle brooms, a teleboom, a long floor bucket, a cold planer and a v-blade.

ASV Unveils New Site Clearing Attachments

The new products include a low-flow mulcher, stump grinders, angle brooms, a teleboom, a long floor bucket, a cold planer and a v-blade.

Cleaning lawn tools thoroughly is the first step in winterizing them.

Winterize Your Landscaping Tools

An expert from Sod Solutions emphasizes the importance of winterizing work tools, provides a checklist of supplies you’ll need and offers step-by-step instructions on how to protect your lawn care tools from the harsh winter elements.

The Multi-Purpose Power Rake comes stock with a smooth edge, with the option for a Bolt on Edge or welded teeth.

IronCraft 4-in-1 Multi-Purpose Power Rake

The Multi-Purpose Power Rake comes stock with a smooth edge, with the option for a Bolt on Edge or welded teeth.

The mulcher can be tilted hydraulically during operation and can be raised up to 90° and lowered up to 65°.

SEPPI M. Offers L7 Flex Offsetting Mulcher

The mulcher can be tilted hydraulically during operation and can be raised up to 90° and lowered up to 65°.

The acquisition expands Fecon's tree-trimming capabilities.

Fecon Buys Land Clearing Attachment Maker TREEfrogg

The acquisition expands Fecon's tree-trimming capabilities.

The Drum Mulcher DC Pro is engineered with a 50-in. cutting width to slice through trees and brush and mulch material up to 8 in. in diameter.

Diamond Mowers Releases Drum Mulcher DC Pro Attachment

The Drum Mulcher DC Pro is engineered with a 50-in. cutting width to slice through trees and brush and mulch material up to 8 in. in diameter.

The company's Trim Ex saw attachments are low-maintenance solutions (no loose chains or require any bar oil for lubrication) for site preparation, land clearing, landscaping and trimming with machines.

Fecon Adds Trim Ex Saw Attachments

The company's Trim Ex saw attachments are low-maintenance solutions (no loose chains or require any bar oil for lubrication) for site preparation, land clearing, landscaping and trimming with machines.

Featuring a combination of beveled blades and carbide teeth, the new Kwik Cut is designed to slice through grass, weeds, brush and small trees up to 10 in. in diameter with the ability to grind stumps and brush to ground level.

Loftness Launches Kwik Cut Brush Cutter Attachment

Featuring a combination of beveled blades and carbide teeth, the new Kwik Cut from Loftness is designed to slice through grass, weeds, brush and small trees up to 10 inches in diameter with the ability to grind stumps and brush to ground level.

Designed to accommodate loaders with 20-50 gpm, the forestry mulcher is equipped with a CUT CONTROL rotor and a variable torque motor featuring M-BOOST technology.

Seppi M. Unveils MINIFORST cl AMERICA Special Edition Forestry Mulcher

Designed to accommodate loaders with 20-50 gpm, the forestry mulcher is equipped with a CUT CONTROL rotor and a variable torque motor featuring M-BOOST technology.

The BL1/SSL/VT presents a groundbreaking innovation for skid steers, delivering superior performance, high visibility, and reliability. The integration of advanced Bite Limiter technology guarantees productivity, while its customizable blade options cater to diverse project requirements.

FAE Reveals New Equipment at Utility Expo 2023

FAE has new technology and attachments that will redefine industry standards.

The X-Treme Tree Reaper is available with two direct drive motor options: a 16-26 gpm gear motor (case drain not required) or a 17-30 gpm bent axis piston motor (case drain required).

IronCraft Unveils X-treme Tree Reaper Brush Cutter

The X-Treme Tree Reaper is available with two direct drive motor options: a 16-26 gpm gear motor (case drain not required) or a 17-30 gpm bent axis piston motor (case drain required).

With a working width of 60 in., the disc mulcher is purpose-built for 75- to 132-hp skid steers and compact track loaders that operate with as little as 30-50 gallons per minute (gpm) of auxiliary hydraulic flow.

Fecon Introduces Disc Hawk Compact Mulcher

With a working width of 60 inches, the disc mulcher is purpose-built for 75- to 132-hp skid-steers and compact track loaders that operate with as little as 30-50 gallons per minute (gpm) of auxiliary hydraulic flow.

Compatible with skid steers, compact track loaders and excavators, the Stump Ax is engineered for landscaping, land clearing and construction applications.

Loftness Launches Stump Grinder Attachment

Compatible with skid-steers, compact track loaders and excavators, the Stump Ax is engineered for landscaping, land clearing and construction applications.

Whether it’s used for rebuilds, new construction, utility repairs or other work, a backhoe attachment can be used for a wide array of earthmoving tasks.

How Attachments Can Ease Construction Workforce Shortages

Attachments can turn a single piece of equipment into a multifunctional workhorse – something that today’s strained workforce needs more than ever.

The Werk-Brau Tilting Buckets are designed for a wide range of ditch digging or cleaning applications, creating unique slopes, and grading projects, among other tasks.

How Attachments Turn Machines Into Multipurpose Tools

The use of attachments transforms one piece of equipment into a multipurpose tool for a variety of construction functions.

This attachment has a continuous cut capacity of 4 in., a flow range of 16-46 gpm and is intended for 10+ hours of weekly use (500+ hours annually).

Diamond Mowers Brush Cutter Pro X

This attachment has a continuous cut capacity of 4 in., a flow range of 16-46 gpm and is intended for 10+ hours of weekly use (500+ hours annually).

Available in a 72-in. cutting width, the Brush Cutter Pro has a continuous cut capacity of 3 in. (and a maximum cut capacity of 5 in. when handling grass, branches and brush) and a flow range of 17-41 gpm.

Diamond Mowers Brush Cutter Pro

Available in a 72-in. cutting width, the Brush Cutter Pro has a continuous cut capacity of 3 in. (and a maximum cut capacity of 5 in. when handling grass, branches and brush) and a flow range of 17-41 gpm.

Featuring a 60-in. cutting width, this attachment slices through trees and brush up to 14 in. in diameter, shreds material up to 6 in. in diameter and attaches to most skid steers and compact track loaders.

Diamond Mowers Disc Mulcher Belt Drive Pro X

Featuring a 60-in. cutting width, this attachment slices through trees and brush up to 14 in. in diameter, shreds material up to 6 in. in diameter and attaches to most skid steers and compact track loaders.

The extension provides 16 in. of additional cutting width (82 in. total) and flexes up to 12 degrees to follow the terrain.

Altoz Launches 16-in. Deck Wing Extension for Mowers

The extension provides 16 in. of additional cutting width (82 in. total) and flexes up to 12 degrees to follow the terrain.

With 2-in. tine spacing, this attachment can be used in dry, loose soil conditions.

Artillian Tractor Releases Rock Bucket Attachment Series

With 2-in. tine spacing, this attachment can be used in dry, loose soil conditions.