This canister-style dust collector utilizes Venturi-style suction and manual or automatic purge control to remove dust from the air during concrete drilling.
- Can be retrofitted to any existing Minnich drill and can be adapted to fit other dowel pin drill makes and models
- Comes with drill rod guide collection boots, a 5-gal. pail-type hopper and up to 20 ft. of vacuum hose per drill
- Each canister accommodates up to two rock drills and offers a 60 sq. meter filter area
- Requires 40 (hydraulic drill) to 50 scfm (air drill) and 60 to 110 psi
- Meets requirements for dowel pin drills found in Table 1 of OSHA's respirable crystalline silica standard when used with appropriate filter
- Single canister is 48 in. tall by 17 in. deep by 40 in. wide; weighs 198 lb.
- Double canister is 48 in. tall by 18 in. deep by 40 in. wide; weighs 390 lb.
- Triple canister is 48 in. tall by 18 in. deep by 58 in. wide; weighs 598 lb.
- Air flow: 50 cfm (single); 100 cfm (double); 150 cfm (triple)
- Max vacuum: 60 psi
Video: Minnich Dust Collection System
Request More Information
Fill out the form below to request more information about Minnich Dust Collection System for Concrete Dowel Pin Drills