Wheeled Jaw Crusher-2644

March 26, 2013

Irock Wjc 26441 10909980

Irock White 10784522

IROCK Crushers introduces the Wheeled Jaw Crusher-2644 (WJC-2644) that is recommended for use as a primary crusher.

Capable of processing hard rock, recycled concrete, sand and gravel, and slag
Powered by a 350-hp Caterpillar C-9 ACERT Tier 3 engine
Produces up to 370 tph
A capacity of 10.5 cu. yds.
Equipped with a 48-in. by 36-ft. discharge belt
Features a fixed discharge height of 11 ft.
Stockpiling capability enables users to pair the WJC-2644 with screening units
Hydraulic adjusting chamber allows operators to adjust crushing size from a 2-in. minimum closed side setting to a 6-in. maximum side setting
A 24-in.-wide grizzly bypass conveyor with an adjustable flop gate
A 40-in. by 14-ft. feeder with a 5-ft. grizzly bar section
Components of the crusher are open and easily accessible for ease of lubrication, part replacements or other maintenance
Features radial tires mounted under a 24-in. beam chassis for easy transport
Can be set up or torn down in less than an hour

IROCK

Fill out the form below to request more information about Wheeled Jaw Crusher-2644

Demolition crews with the Unified Command begin cutting the top portion of the north side of the collapsed bridge into smaller sections for safe removal by crane in the Patapsco River, in Baltimore, Maryland, March 30, 2024. Salvage teams use exothermic cutting torch to systematically separate sections of the steel bridge, which will be taken to a disposal site.

Alternate Temporary Channels Opening Around Key Bridge in Baltimore

A temporary, alternate channel on the northeast side of the main channel in the vicinity of the Key Bridge is being established for commercially essential vessels.

Woa Astec

Everything We Saw At World of Asphalt 2024

Nashville was hardly big enough to contain everything that World of Asphalt 2024 had to offer, and whether you were there or not, there are plenty of things you might have missed!

The machine is designed for rehandling applications, with a high tipping load and long reach to fill a truck in three passes.

Volvo CE Unveils L180 3-Pass Rehandler

The updated machine is designed for rehandling applications, with a high tipping load and long reach to fill a truck in three passes.

Intellipac Image

Astec Reveals IntelliPac Moisture System for Asphalt Producers

Astec shows off more of what it plans to bring to the show, this time for asphalt plants and producers.

The quality of the aggregates depends on the processing, so original equipment manufacturers have developed crushers in various sizes and capacities.

Roadbuilders' Guide to Crushers: Increasing Access to Recycled Materials

Crushers will only become more popular in the next five years as sustainable building becomes more emphasized across the U.S.

Stand the Test of Time | JLG®

Stand the Test of Time | JLG®

Your work is meant to weather through some of the toughest conditions. Your equipment should do the same. That's why the best contractors trust JLG®.

When reusing materials on-site or recycling materials is not an option, you can recover materials and then donate them to community organizations.

Managing Jobsite Waste for Safety and Sustainability

With construction waste being a serious problem for 95.71% of projects, finding cost-effective and safe solutions becomes vital for the protection of contractors, workers, the environment and the public.

Show attendees will get an up-close look at the company’s patented control system: IMT CMD.CTRL.

IMT Reveals Lineup of Service Truck Solutions for Work Truck Week 2024

The IMT prototype battery-powered hydraulic telescopic crane and compressor package will be on display during Work Truck Week 2024.

Upgraded features include flush end disc, robotic welding and more.

Superior Industries Upgrades Conveyor Idler

Upgraded features include flush end disc, robotic welding and more.

RX-405 Cold Planer

Astec Expands Rock to Road Strategy at World of Asphalt 2024

Five new products and product features will be on display at Astec's booth #1263 where attendees will get a first-hand look at innovative additions to crushing, paving, and milling.

Matching the attachment to the machine is key when it comes to efficiently using mulching heads.

Modern Mulching Heads on the Construction Jobsite

The top tips to maximize mulching head performance and help contractors get the most out of their mulcher.

Inspired by You, Designed for the Job | JLG®

Inspired by You, Designed for the Job | JLG®

Every job is a new way to leave your mark on tomorrow. Don’t settle for anything less than a partner who shares your drive to do your best work.

By distributing weight evenly, limiting accident risks and adhering to extreme safety protocols, rigging is a pillar for preventing costly delays and mishaps at construction sites.

What Is Rigging & Machine Moving in Construction?

Creativity, planning and technology are required for safe and efficient equipment transportation.

Green Asphalt: Be Humble and Kick Asphalt

One asphalt plant is doing what many consider as the unthinkable: producing asphalt mixes from 100% reclaimed asphalt pavement (RAP), and they can convert any asphalt plant to do the same. Extensive testing says it works, but changing opinions is hard.

The TJ2440 single-toggle jaw crusher handles different types of materials like ores and rock, to travel and recycled concrete.

Terex Launches TJ2440 Static Jaw Crusher

The TJ2440 single-toggle jaw crusher handles different types of materials like ores and rock, to travel and recycled concrete.

With output of up to 600 tons per hour, this machine breaks coarse rocks in-situ, as found in hand-packed pavement layers or stony soils and produces a homogeneous mix in a continuous process.

Wirtgen Launches WRC 240(i) Rock Crusher

With output of up to 600 tons per hour, this machine breaks coarse rocks in-situ, as found in hand-packed pavement layers or stony soils and produces a homogeneous mix in a continuous process.

Onboard weighing systems are the key to reducing your cost of material handling. Find out how payload technology works and five ways it can improve your profitability.

How to Get the Most Profit Out of Every Pass and Load

Onboard weighing systems are the key to reducing your cost of material handling. Find out how payload technology works and five ways it can improve your profitability.

There are environmental benefits for companies operating battery-electric and new fuel vehicles beyond reducing their contribution to greenhouse gas emissions.

Zero Emission Machines to Shake Up Oil & Lubricants Industry

Change is underway in the vehicle oil and lubricants industry as a result of the inexorable move toward zero emission vehicles, in particular battery-electric machines.

The MOBIBELT MBT 20i and MBT 24i are equipped with a large 1.6-yd³ feed hopper made of resistant KRS (Kleemann Resistant Steel), which permits the feeding of material with an edge length of up to 8 in.

Kleemann Launches MOBIBELT MBT 20i and MBT 24i Mobile Stackers

The MOBIBELT MBT 20i and MBT 24i are equipped with a large 1.6-yd³ feed hopper made of resistant KRS (Kleemann Resistant Steel), which permits the feeding of material with an edge length of up to 8 in.

Equipped with an electric 335 hp drive, the MOBIREX MR 130i PRO serves as a primary and secondary crusher for recycling, material screening and debris handling.

Kleemann Unveils MOBIREX MR 130i PRO Impact Crusher

Equipped with an electric 335 hp drive, the MOBIREX MR 130i PRO serves as a primary and secondary crusher for recycling, material screening and debris handling.

Application for the Kleemann MOBIREX MR 100(i) NEO/NEOe ranges from different recycling operations, such as the processing of concrete, rubble and asphalt, to the processing of soft to medium-hard natural stone.

Kleemann MOBIREX MR 100(i) NEO/NEOe Mobile Impact Crusher

Application for the Kleemann MOBIREX MR 100(i) NEO/NEOe ranges from different recycling operations, such as the processing of concrete, rubble and asphalt, to the processing of soft to medium-hard natural stone.

The two educational guides complement Haver and Boecker Niagara’s signature PROcheck, a program dedicated to keeping customers’ operations running.

Haver and Boecker Niagara Unveils Educational Guides

The two educational guides complement Haver and Boecker Niagara’s signature PROcheck, a program dedicated to keeping customers’ operations running.

Powered by a 56-hp KOHLER KDI 1903 turbocharged engine, the RCU-55 can work on steep slopes up to 55°.

FAE RCU-55 Remote Controlled Tracked Carrier

Powered by a 56-hp KOHLER KDI 1903 turbocharged engine, the RCU-55 can work on steep slopes up to 55 degrees.

Vibration analysis software monitors the vibrating screen’s performance in real-time by detecting problems before they lead to diminished performance, decreased efficiency and increased operating costs.

The Road Less Traveled Can Offer Greater Screening Productivity

Departing from traditional screening systems to advanced technologies improves productivity and profits.