ARDEX introduces ARDEX K 15 Premium Self-Leveling Underlayment and ARDEX FEATHER FINISH, a system to control moisture in new or existing concrete slabs, address tolerance and surface finish issues and eliminate the disparity between Divisions Three and Nine, while expediting construction schedules.
The ARDEX Concrete Management System (ACMS) addresses these challenges through a new, specifiable process of finishing method for concrete with an integrated system of moisture control and self-leveling underlayment products.
- In new construction applications, the ARDEX Concrete Management Systems saves time and labor by eliminating the traditional steel trowel step in the finishing process. The contractor will only place, consolidate, strike off and bull-float/ re-straighten the surface, then allow the bleed-water to dissipate. Following a wet-cover or liquid membrane cure (3 to 7 day minimum) and surface brush blast, a layer of ARDEX self-leveling underlayment is installed either immediately after deflection or during interior build out.
- ACMS can be installed with an early option, using both an ARDEX Moisture Control epoxy followed by a self-leveling underlayment.
- The ARDIFLO System complements ACMS with pumping platforms that increase installation efficiency.
- The POWERFLO High-Capacity Pump Trailers are designed for outdoor location, eliminating freight elevators, material staging, dust and bag disposal through the use of Super Sacks and utilize a single source for power and water.
- Silo capacity of 22,000 lbs. with an articulating knuckle boom crane and remote control hydraulic hatch that make loading Super Sacks a breeze.
- The POWERFLO pumps 150 feet vertically and 600 feet horizontally on its way to providing a flat and level floor.
Companies in this article
Request More Information
Fill out the form below to request more information about ARDEX Americas Breakthrough Concrete Finishing Innovation
