Demolition/Recycling

Team Approach Proves Successful for Ford Plant Decommissioning and Demolition

National Demolition Association

The structural demolition of the heavy industrial equipment and steel structure resulted in over 60,000 GT of scrap to be demolished, sorted and loaded out for recycling.
The structural demolition of the heavy industrial equipment and steel structure resulted in over 60,000 GT of scrap to be demolished, sorted and loaded out for recycling.
National Demolition Association

Additional obstacles included selective demolition and cleanup of 11 rooftop substations to a TSCA landfill, working over nearly 300,000 square feet of basements, demolition of a variety of stacks and...
Additional obstacles included selective demolition and cleanup of 11 rooftop substations to a TSCA landfill, working over nearly 300,000 square feet of basements, demolition of a variety of stacks and a 150-foot-tall MACT structure that sat in the flight path of nearby Cleveland Hopkins International Airport.

Information from this article was first published in Demolition Magazine and is being reused with permission from the National Demolition Association . From the onset of the initial bid to the final phases of the project that is now nearing completion, it was apparent that a project like Ford Motor Company’s Cleveland Casting Plant Environmental Decommissioning and Demolition would present a lot of challenges. Built in the 1950s, the approximately 1.4 million-square-foot former...
More

First « Previous 1 2 3 Next » Last

Team Approach Proves Successful for Ford Plant Decommissioning and Demolition

Work included a multi-faceted and comprehensive environmental decommissioning and cleanup program paired with complete structural demolition and removal down to grade

Article • June 7th, 2013
Combination of Demolition Techniques Remove Parking Garage Attached to Functioning Hospital

A combination of saw cutting, demo with smaller machines and traditional mass demo using specialty tools helped a demolition contractor separate and remove a parking garage from a still-operational hospital

Article • May 9th, 2013
National Demolition Association Elects New President

Jeff Kroeker of Kroeker Inc. will serve as the associations next president; new Executive Committee and Board of Directors members elected

Press Release • May 7th, 2013
IROCK Expands Dealer Network

Ace Equipment Sales will become the company's New England/New York dealer

Press Release • May 1st, 2013
Emery Winslow Scale Company

Company • April 26th, 2013
OSHA Rule on Cranes and Derricks in Demolition and Underground Construction Goes Into Effect

Final rule covering use of cranes and derricks in demolition work and underground construction becomes effective May 23

News • April 23rd, 2013
Spec Sheet: Brokk 400D Demolition Machine

Document • April 18th, 2013
Brochure: Brokk 400D Demolition Machine

Document • April 18th, 2013
Brokk 400D Demolition Machine

98-hp diesel robot reaches nearly 23 ft.

Product • April 18th, 2013
Spec Sheet: Brokk 60 Demolition Machine

Document • April 18th, 2013
Brochure: Brokk 60 Demolition Machine

Document • April 18th, 2013
Brokk 60 Demolition Robot

The Brokk 60 remote-controlled demolition machine is a faster more power version of the Brokk 50 demolition machine. Flow rate increased from 4.8 to 5.8 gpm Enhancements to control system allow for continuous, accurate temperature and pressure...

Product • April 18th, 2013
Sandvik UH450E Tertiary Crusher to be Powered by Volvo Penta Power-Generation Engine

Sandvik Construction has selected Volvo Penta power-generation engines for its new electric-powered track-mounted tertiary crushers

Press Release • April 18th, 2013
Brochure: Terex Finlay J-1170 Jaw Crusher

Document • April 17th, 2013
Finlay J-1170 Primary Mobile Jaw Crusher

The Terex Finlay J-1170 features a 44-in. by 28-in. jaw chamber for material reduction and product sizing in the processing of blasted quarry rock and ore material. The chamber is also available with optional hydraulic release for crushing...

Product • April 17th, 2013