The Terex AC 1000 crane had to erect four ENERCON E70 wind turbines with a hub height of 275 ft.

The Terex AC 1000 crane had to erect four ENERCON E70 wind turbines with a hub height of 275 ft.

The Terex AC 1000 crane was set up with an SSL configuration, a 207-ton counterweight and a 177-ft.-long luffing fly jib on a 39-ft. variable extension (VA) for erecting five wind turbines in...

The Terex AC 1000 crane was set up with an SSL configuration, a 207-ton counterweight and a 177-ft.-long luffing fly jib on a 39-ft. variable extension (VA) for erecting five wind turbines in Germany.

For the last two lifts, the crane was placed about 98 ft. in front of the wind turbines’ foundation and had to work with a large working radius.

For the last two lifts, the crane was placed about 98 ft. in front of the wind turbines’ foundation and had to work with a large working radius.

Two turbines were erected at one location and the other two at a neighboring one. The maximum weight for each load lifted was 72 tons.

Two turbines were erected at one location and the other two at a neighboring one. The maximum weight for each load lifted was 72 tons.

Crane service provider Neeb-Schuch recently erected a total of four wind turbines in a windpark close to Hannover and one wind turbine in Benhausen, Paderborn, using a Terex AC 1000 all-terrain crane

Crane service provider Neeb-Schuch recently erected a total of four wind turbines in a windpark close to Hannover and one wind turbine in Benhausen, Paderborn, using a Terex AC 1000 all-terrain crane