Trencher-Ditcher-Directional Drilling | ForConstructionPros.com - Page 17

Underground

First « Previous 16 17 18 Next » Last

MT12 Micro Trencher

The MT12 MicroTrencher is part of a complete microtrenching system that includes a specially configured RT45 or RT55 trencher and an FX60 vacuum excavation system. Cuts through asphalt to create trench for fiber-optic cable...

Product • September 21st, 2010
D20x22FX Series II Flex Angle Drill

The D20x22FX Series II Flex-Angle Drill is capable of drilling from 18° to 90° entry points, and anywhere in between. Built for vertical and steep-angle geothermal loop installations Also functions as a horizontal directional drill (HDD) that...

Product • September 20th, 2010
AIR 555 SDT

The low-profile AIR 555 SDT removes wet and dry materials and returns dry materials to the hole to use as backfill. Heavy-duty trailer with torsion axles for mobility or truck-bed option 84-hp Yanmar diesel engine 1,000-cfm vacuum 180 psi x...

Product • September 20th, 2010
Front Steer Boring Unit

ICON Tunnel Systems and Bohrtec, Gmbh offer the Front Steer Boring Unit (FSBU), an articulating steering head for the trenchless installation of steel casings. Open face cutting wheel allows for excavation of hard ground up to 100 blow counts/12...

Product • September 20th, 2010
Triple D HDD, Boring and Plowing Tools

The line of Triple D Enterprises' horizontal directional drilling (HDD), compaction boring and cable plowing tools and equipment is available under the Condux brand. Includes reamers, paddle bits and sonde housings for HDD applications...

Product • September 20th, 2010
OnGrade System

OnGrade is an advanced, accurate system for installing new gravity-flow sewer systems using horizontal directional drilling. Utilizes the 8500TK tracker, an advanced 850BG beacon and a rotating grade laser plane to establish and maintain grade...

Product • September 20th, 2010
Center Rock Drill Breaks Through to Trapped Chilean Miners

Drilling operations at the San Jose mine in Copiapo, Chile, have broken through to the miners trapped 2,070 feet underground.

Article • September 20th, 2010
Hand-Held Core Drill

Hand-held diamond core drilling unit for dry and wet use 2.6 hp motor with an aluminum motor housing Three-speed gearing For 5/16-in. up to 6-in. holes Three threading options: ½ in., 5/8 in.-11 and 1 ¼ in.-7 Optional second back...

Product • September 8th, 2010
Rodia Tools

Company • September 8th, 2010
TCT Annular Cutters / Hole Cutters

Produced in to Fe Powertools standards, the TCT Annular Cutters will do the job you intended it for. TCT hole cutters can be refitted with new teeth. The TCT hole cutter line of FE Powertools can be used to drill the most common types of steel (

Product • August 19th, 2010
HSS Annular Cutters / Hole Cutters

The HSS hole cutters are the most commonly used in the Fe Powertools line. The HSS hole cutters can be reground time and time again. The HSS hole cutter line of FE Powertools can be used to drill the most common types of steel (

Product • August 19th, 2010
FE 100 R/L Magnetic Drilling/Tapping Machine

FE 100 R/L magnetic drilling machine is suited for multiple tasks. A more complete mag drill you cannot wish for. With the exchangeable morse taper 3, you can drill with hole cutters up to Ø 100 mm, tap up to M30 and use twist drills up to Ø 31.75...

Product • August 19th, 2010
FE 50 R/L Magnetic Drilling/Tapping Machine

FE 50 R/L is versatility in a compact form. The exchangeable morse taper 2 makes this magnetic drill an all around machine for all drilling purposes. The variable speed and right/left option enable this magnetic drill to also be used for tapping...

Product • August 19th, 2010
FE 50 Magnetic Drilling Machine

The exchangable morse taper 2 makes this machine an all-around machine for all drilling purposes. This machine is powered by a 1,150 watt Eibenstock drill. A continuous internal coolant system is an optional supply for this machine.

Product • August 19th, 2010
FE 32 R/L Magnetic Drilling/Tapping Machine

FE 32 R/L is a multi-task drilling machine. It is designed to not only drill with hole cutters and twist drills but also to be used for tapping / threading up to M16. This magnetic drill is powered by a 1,050 watt Eibenstock drill. A continuous...

Product • August 19th, 2010

First « Previous 16 17 18 Next » Last

Register

Enhanch Your Experience.

When you register for SDCExec.com you stay connected to the pulse of the industry by signing up for topic-base e-newsletters and information. Registering also allows you to quickly comment on content and request more infomation.