For Construction Pros

The Pierce Airrow II pneumatic piercing tools are designed to perform short- to medium-range compaction boring projects, pipe ramming and pushing and pipe pulling. Seven models from 2.25- to 4.25-in. outside diameter, with or without threaded heads...

Product • July 6th, 2007

Terrain Leveler

The Terrain Leveler surface excavation attachment is designed specifically for site preparation and excavation, surface mining, road construction and soil remediation. Top-down cutting action positions teeth on top of drum directly over the top of...

Product • July 5th, 2007

T6B Trencher Work Tool

Caterpillar T6B Trencher The T6B trencher is designed to work with standard-flow hydraulics. Direct-drive motor provides a balance of chain speed, torque and chain pull 36-in. adjustable boom with 6-, 8-, 10- and 12-in. cutting widths Optional...

Product • June 25th, 2007

1324ST Steerable Walk-Behind Trencher

These 900-lb. steerable, walk-behind trenchers feature precise wheel control to help eliminate drifting, making them well suited for trenching uneven terrain or hillsides. Zero turning radius Capable of long, arching curves with virtually no...

Product • June 25th, 2007

RT45 Trencher

An upgrade of the RT40, the RT45 ride-on trencher includes a quiet Tier IV Interim-compliant engine, improved air filtration and easy-to-read gauges in the operator's station. Features include a roomy operator's station, intuitive controls, easily...

Product • June 25th, 2007

Pumps Keep Rail Project on Track

Pumping in all kinds of weather.

Article • June 21st, 2007

Control Logic Critical to Bypass Solution

Expecting to dismantle and replace its entire Puncheon Run Pumping Station the City of Dover, DE, needed a bypass pumping solution capable of handling from 1,875 gpm at 168 ft. of head to 3,000 gpm at 120 ft. of head.

Article • June 21st, 2007

STR48 Trencher Attachment

DISCONTINUED Vermeer STR48 Trencher Attachment The STR48 trencher attachment is designed for use with the Vermeer S600TX compact utility loader 48-in. maximum dig depth and 8-in. maximum dig width 18-in.-diameter discharge auger Attaches to...

Product • June 19th, 2007

T150 and T250 Skid Steer Trencher Attachments

Premier Auger Trencher Attachments The T150 and T250 planetary drive trencher attachments offer a range of speed and torque combinations to accommodate your skid steer requirements. 3- to 4-ft. digging depths and 6- to 12-in. widths Manual side...

Product • June 19th, 2007

Model XR-21

The Model XR-21 trenching attachment is best suited for hydraulic systems from 13 to 25 gpm. Premium hydraulic motors Maintenance-free tapered roller bearing in the nose Self-aligning boom design with grease cylinder tensioning system Standard...

Product • June 19th, 2007

trench filler attachment

Toro Trench Filler Attachment The Toro Company introduces the trench filler attachment that allows operators to fill trtenches in a single pass. Developed for use with the Dingo compact utility loader, the trench filler is equpped with two sets of...

Product • June 19th, 2007

Trencher Boom Attachment

This 4-ft. trencher boom attachment is available for the Toro TRX-19 dedicated trencher or any Dingo compact utility loader. Enables installation of utility lines at depths exceeding 42 in. Suitable for projects such as irrigation, drain tile or...

Product • June 19th, 2007

Series 2000 Chain Trenchers

The Series 2000 chain trenchers include four models offering Caterpillar engines ranging from 300 to 830 hp. Operating weights range from 75,000 to 300,000 lbs. Cutting widths from 12 to 72 in. with cutting depths up to 24 ft. Mechanical power...

Product • June 19th, 2007

Redesigned drills

Rev Drill Redesigned Drill Models Rev Drill offers two redesigned versions of its drilling products. Series: 3H.D mounts on any 16- to 25-ton excavator and offers torque motors from 7,000- to 14,000-ft.-lbs., a 10,000- or 14,000-ft.-lb. torque...

Product • June 19th, 2007

Model 12 Mighty Max

The Model 12 handles cased bores from 2 3/4 to 12 in. in diameter. Weighs just 880 lbs. for easy transport Spring-centered control valves offer easy control for even the most difficult bores Includes a 12-in. master pusher and saddle, 3-ft. track...

Product • June 19th, 2007