Maintenance

  • Mobile Lube System Selection

    Applications dictate when a skid or trailer is the best choice.

    Article • February 27th, 2010

  • Don't Deflate Roller Tire Life

    Tire care is a priority to keep pneumatic rollers reliable.

    Article • January 31st, 2010

  • Liquid Wrench Lubricants

    Liquid Wrench offers six lubricant, penetrant and specialty products, including the reformulated Penetrating Oil and Chain Lube. Penetrating Oil quickly loosens corroded bolts, nuts and parts without a strong odor, and can be used to free up locks...

    Product • January 22nd, 2010

  • Oil Filtration Systems

    These high-efficiency bypass filtering systems are designed to remove solid, liquid and gaseous contaminants from engine or hydraulic oil before they can accumulate and cause damage. Work in conjunction with the full-flow filter to constantly...

    Product • January 22nd, 2010

  • Heavy Duty Clear Penetrating Grease

    This high-tack, heavy-duty clear penetrating gel withstands high pressure and temperatures from -30° to 500° F and will not break down, harden or separate. Contains PTFE to reduce friction, galling and scarring Waterproof to prevent corrosion...

    Product • January 22nd, 2010

  • BLUE WORKS Maintenance Products

    WD-40 offers the BLUE WORKS line of industrial-strength, specialty maintenance products designed specifically for the needs of industrial users. Includes Contact Cleaner, Degreaser, Dry Lube PTFE Formula, High-Performance PTFE Lubricant...

    Product • January 22nd, 2010

  • Lube Equipment

    Sage Oil Vacs feature a vacuum and pressure process for performing fluid exchanges. Fewer wear parts and lower operation cost Available in skid, trailer or truck bed configurations Multiple tanks and tank sizes available Less handling of new and...

    Product • January 22nd, 2010

  • M12 Cordless Grease Gun

    The 2446-21XC cordless grease gun is capable of delivering over 8,000-psi max operating pressure for heavy-duty applications and dispenses up to seven grease cartridges per battery charge. High pressure enables use for heavy machinery, cold weather...

    Product • January 22nd, 2010

  • Wirelife Almasol

    Wirelife Almasol Syn Coating Lubricant is a tacky, non-asphaltic synthetic lubricant with high film strength, making it suited for extreme environments and conditions. Provides outer surface protection for wire rope and cable Able to withstand...

    Product • January 21st, 2010

  • Lubrication Engineers, Inc.

    A leader in lubricants since 1951, Lubrication Engineers, Inc. creates solutions for even the toughest lubrication challenges in a variety of industries worldwide. The lubricants are formulated from highly refined base oils and proprietary additives...

    Company • January 21st, 2010

  • KB 88 The Ultimate Penetrant

    KB 88 The Ultimate Penetrant is a premier, rust busting, penetrating fluid that quickly cuts through rust and frozen parts. High solvency, low surface tension and special additives enhance penetration, lubrication and corrosion attack Meets many...

    Product • January 21st, 2010

  • Plus-50 II Premium Engine Oil

    The Plus-50 II is suited for use in high-speed four-stroke diesel engines in heavy-duty agricultural and off-road equipment and lighter duty on-road vehicles. Exceeds CJ-4 requirements Allows for extended oil change intervals up to 500 hours...

    Product • January 21st, 2010

  • Heavy Duty Radiator Stop Leak

    Heavy Duty Radiator Stop Leak safely and effectively seals internal, external and coolant-to-oil leaks in plastic, aluminum and metal radiators, freeze plugs, gaskets, heads, blocks and heater cores. Features Rhizex pellets that dissolve in minutes...

    Product • January 21st, 2010

  • Synthetic Compressor Oils

    PAROIL S and PAROIL S xtreme fully synthetic, premium-quality oils allow for change intervals of 1,000 hours without any loss in performance or air compressor longevity. PAROIL S formulated primarily for high-pressure applications, plus can be used...

    Product • January 21st, 2010

  • Maintenance Cuts Paver and Milling Machine Costs

    To keep road projects on track, and downtime to a minimum, contractors should follow recommended maintenance practices for paver and milling machine undercarriage systems. This includes maintaining proper track tension, regular cleaning and periodic...

    Article • December 10th, 2009