Paving

  • CC422V HF Vision Series

    Atlas Copco Dynapac CC422V HF Asphalt Roller The CC422V HF tandem vibratory asphalt roller features a pressurized sprinkler system and spring-loaded scrapers. 125-hp Cummins diesel engine 66-in.-wide vibratory drums with high/low frequencies...

    Product • June 19th, 2007

  • 3313 Asphalt Paver

    BOMAG 3313 Asphalt Paver The redesigned, gravity-fed 3313 features a 50-hp Cummins water-cooled diesel engine. Load-sensing hydrostatic drive Single-speed drive motor provides travel and working speeds up to 250 fpm 8- to 13-ft. paving widths...

    Product • June 19th, 2007

  • AP-1000D

    The AP-1000D is a 10-ft. wheel-type asphalt paver that features a Cat C7 turbocharged, six-cylinder, Tier III engine with ACERT technology. Dual swing-out operator stations Hydrostatic propel system with three propel modes High-capacity cooling...

    Product • June 19th, 2007

  • CC222 HF/232 HF

    Dynapac Tandem Asphalt Rollers The CC222 HF/232 HF tandem asphalt rollers feature a high vibration frequency with low amplitude. 18,520- and 20,065-lb. maximum operating weight 20,060/15,800 lbs. of centrifugal force per drum at high/low amplitude...

    Product • June 19th, 2007

  • TP1315

    13-wheel, 15-ton towed pneumatic tire roller 12 of 13 wheels oscillate for compaction of uneven surfaces 96-in. rolling width 195-cu.-ft. ballast capacity Ballasted weight to 32,000 lbs. Load per tire from 647 to 2,461 lbs.

    Product • June 19th, 2007

  • Hamm 3412 VIO

    Hamm 3412 VIO The 3412 VIO combines Hamm Oscillation Technology with conventional vibration technology in a single drum. Oscillation and conventional vibration frequency of 1,980 vpm, with an oscillation and centrifugal force of 64,575 lbs. 84-in...

    Product • June 19th, 2007

  • MK-1 Transfer Sweeper

    Broce's MK-1 transfer sweepers are designed to pick up and transfer material to a truck in a continuous operation. Allows for savings in time, equipment and manpower Loads to a height of 10 ft. 6 in. straight ahead or to either side

    Product • June 19th, 2007

  • CC 900G

    Atlas Copco Dynapac CC 900G 1.5-ton operating weight Honda gas engine 35-in. drum width Both drive motors are equipped with fail-safe brakes

    Product • June 19th, 2007

  • CA134 and CA144 Soil Compactors

    Dynapac Soil Compactors Dynapac announces its newest soil compactors, the CA134 and CA144. These self-propelled soil compactors replace the CA121 and CA141 models, respectively. The CA134 has a drum width of 54 in. and the CA144's drum width is 66...

    Product • June 19th, 2007

  • RD 11 asphalt roller

    One-ton roller offers dual-drum drive and articulated steering. 18-hp Honda or Vanguard engine 35.4-inch drum width 414 foot per minute travel speed 3,000 pounds of centrifugal force

    Product • June 19th, 2007

  • BASIC Model 700 Pneumatic roller

    The 1 1/2- to 3-ton BASIC Model 700 pneumatic roller features a seven-wheel design with wheels that oscillate independently. Hydrostatic drive and power steering 28-hp Kubota water-cooled diesel engine ISO-certified ROPS system Includes a...

    Product • June 19th, 2007

  • Power Curber 5700-C

    The Power Curber 5700-C compact slipformer is equipped with networked digital controls and all crawler steering that allow for stringless pouring technology. MOBA digital control system uses open architecture to interface with 3D or GPS controls...

    Product • June 19th, 2007

  • SV208, SV210, SV212 and SV216

    The Case SV200 series includes four single-drum models with operating weights from 15,741 to 31,553 lbs. and engines from 100 to 148 hp. Smooth or padfoot drum configurations in widths from 66 to 87 in. Dual vibration modes and adjustable...

    Product • June 19th, 2007

  • Pro Curb Series

    This self-propelled, commercial-grade extruder can fill a trench and form curb at the same time. Pours a 16-in. radius 25-hp engine Hydraulic raise and lower system Can extrude 65 yd. in an eight-hour day Manually driven CLS.900 model also...

    Product • June 19th, 2007

  • TV1000 and TV1200

    The TV1000 has a 5,644-lb. operating weight and provides 5,397 lbs. of centrifugal force, while the TV1200 weighs in at 6,382 lbs. and offers 6,776 lbs. of force. Static linear load of 71.7 (TV1000) and 67.5 lbs./in. (TV1200) Features include two...

    Product • June 19th, 2007

  • Enhanch Your Experience.

    When you register for SDCExec.com you stay connected to the pulse of the industry by signing up for topic-base e-newsletters and information. Registering also allows you to quickly comment on content and request more infomation.