For Construction Pros

Hamm 3412 VIO The 3412 VIO combines Hamm Oscillation Technology with conventional vibration technology in a single drum. Oscillation and conventional vibration frequency of 1,980 vpm, with an oscillation and centrifugal force of 64,575 lbs. 84-in...

Product • June 19th, 2007

Shuttle Buggy MTV

Roadtec Shuttle Buggy MTV now features hydraulic drive motors to control each wheel. The Shuttle Buggy MTV eliminates temperature and material segregation problems and helps contractors meet smoothness specs. 300-hp Tier III Cat engine Dual...

Product • June 19th, 2007

CV550 Track Compactor

Sakai CV550 Track-driven Compactor The CV550 track-driven vibratory soil compactor is able to climb up to 45 degree slopes while compacting. Generates more than 50,000 lbs. of centrifugal force 110-in. blade 169-hp Isuzu water-cooled...

Product • June 19th, 2007

Slipform Paver

This paver can slipform any curb and gutter configuration up to 18 in. high by 48 in. wide. Four-cycle, 26.5-hp diesel engine Manual and automatic height controls Quick-attach hopper system All-hydraulic drive systems can be operated in two-wheel...

Product • June 19th, 2007

CA 152 Roller

Dynapac CA 152 The CA 152 single-drum soil compactor is available in smooth and padfoot drum configurations with operating weights (with ROPS) from 15,990 to 16,980 lbs. Dual amplitude with 1,860/2,580-vpm frequencies Up to 25,650 (CA152 and...

Product • June 19th, 2007

CA134 and CA144 Soil Compactors

Dynapac Soil Compactors Dynapac announces its newest soil compactors, the CA134 and CA144. These self-propelled soil compactors replace the CA121 and CA141 models, respectively. The CA134 has a drum width of 54 in. and the CA144's drum width is 66...

Product • June 19th, 2007

Rhino 66X Vibratory Dirt Roller

Stone Rhino 66X Vibratory Dirt Roller The 10-ton, 66-in. Rhino 66X is powered by a 110-hp Cummins water-cooled diesel engine. Dual amplitude with a choice of high or low compaction forces up to 22,500 lbs. Dual speed roller Smooth or padfoot drums...

Product • June 19th, 2007

Cedarapids CR500 Asphalt Paver

Terex Cedarapids CR500 Mainline Pavers The CR500 mainline pavers feature paving widths to 30 ft. Available in traditional slat conveyor and Remix auger delivery systems 260-hp Cummins diesel engine meets Tier III, CARB Tier III and Stage IIIA...

Product • June 19th, 2007

Skewed Tining Option

The T/C-400 and T/C-600 texture/cure machines are now available with a skewed tining option Allows travel of the tining bars to run in a skewed path while the frame is square to the slab Simplifies the ability to transverse tine on newly paved...

Product • June 19th, 2007

Pavers

Roadtec Pavers Roadtec pavers prevent segregated stripes or stripes in the mat with a group of features that satisfy state DOT paver certification requirements. Slat conveyors placed close together to prevent segregation down the center of the feed...

Product • June 19th, 2007

TP1315

13-wheel, 15-ton towed pneumatic tire roller 12 of 13 wheels oscillate for compaction of uneven surfaces 96-in. rolling width 195-cu.-ft. ballast capacity Ballasted weight to 32,000 lbs. Load per tire from 647 to 2,461 lbs.

Product • June 19th, 2007

Notched Wedge Joint Maker

TransTech's Notched Wedge Joint Maker provides notch and wedge joint shaping for increased density of the joint. Provides safety ramp off the mat during construction periods Fits any mainline paver screed Easy to install. Easy to adjust on the...

Product • June 19th, 2007

HD 14 VV

The 4.6-ton HD 14 VV articulated asphalt compactor offer vibration in both the front and rear drums. Capable of running vibration in the front drum only, rear drum only, both drums or no vibration 14,625/9,000 lbs. (high/low) of centrifugal force...

Product • June 19th, 2007

SV208, SV210, SV212 and SV216

The Case SV200 series includes four single-drum models with operating weights from 15,741 to 31,553 lbs. and engines from 100 to 148 hp. Smooth or padfoot drum configurations in widths from 66 to 87 in. Dual vibration modes and adjustable...

Product • June 19th, 2007

8510 Conveyor Paver

The 8510 incorporates 12-in.-diameter casted augers and a 7.5-ton hopper with large radius wings for enhanced material flow. Vibrating, heated Legend Screed System Two-speed hydrostatic drive allows up to 6-in. paving depths at infinitely variable...

Product • June 19th, 2007