Paving

  • SV201TB Soil Compactor

    Sakai SV201TB Soil Compactor The SV201TB is capable of developing 400 psi of total applied force over its 54-in.-wide padfoot drum. Capable of compacting cohesive silts and clays on slopes up to 45 percent Drive at drum as well as the wheels adds...

    Product • September 6th, 2007

  • Mauldin 1500 Paver

    Mauldin 1500 Paver The mauldin 1500 paver features a wide hopper for better truck access. Power extending four auger screed system Automatic "smart" crawler track tensioner 50-hp Kubota diesel engine Gear drive steering eliminates neutral creep...

    Product • September 6th, 2007

  • CT900

    Curb-Tec CT900 Curb Machine The CT900 can balance, fill a trench and extrude curb in a single pass. Extrudes asphalt or concrete at speeds up to 15 fpm Large hopper with big door for loading Long-life augers and symmetrical compactor tube Shares...

    Product • September 6th, 2007

  • 5000 Path Master Conveyor Paver

    The 5000 Path Master conveyor paver offers paving widths from 5 to 9 ft. Low-deck configuration with electronic proportional steering from right or left side of paver 5-ton receiving hopper with hydraulic paver wings Vibrating and heated LeeBoy...

    Product • September 6th, 2007

  • BW900-2 Tandem-Drum Roller

    Bomag BW900-2 Tandem-drum Roller This 1-ton tandem-drum roller has a series-type hydraulic travel system for improved performance on steep grades. Enhanced performance on severe approaches and steep embankments 18-hp Honda gas engine...

    Product • September 6th, 2007

  • Auto Vibe III

    Minnich Auto Vibe III The Auto Vibe III controls vibrator vpm, as well as monitors and stores vibratory data. Programmable vpm and ground speed set points + Two-button vibrator speed control + Monitors up to 62 vibrators, ambient temperature...

    Product • September 6th, 2007

  • TC-2700

    Power Pavers TC-2700 The TC-2700 cures and textures concrete from 12 to 27 ft. wide or up to 32 ft. with optional extensions. Smooth, consistent groove in pavement even at variable speeds Optional four-wheel drive with foam-filled rubber tires or...

    Product • September 6th, 2007

  • GP-2600

    The four-track GP-2600 will pave widths from 12 to 32 ft. at depths up to 19 in. Low-profile engine shroud enhances operator visibility 275-hp Tier II Caterpillar C9 8.8-liter diesel engine with 10% added fuel capacity G21 proprietary digital...

    Product • September 6th, 2007

  • 4700 finishing roller

    Mauldin 4700 Finishing Roller The Mauldin Model 4700 pneumatic finishing roller features an inside turning radius of 10 feet 9 inches. the seven-tire, two-ton unit features an 8.5-inch curb clearance and 1.25-inch wall clearance. Unit has an empty...

    Product • September 6th, 2007

  • BW100AD-4

    Bomag BW100AD-4 An improved exciter system allows the new Bomag BW100AD-4 tandem-drum vibratory roller to work at speeds up to 4 mph compared with 3.5 mph on the model it replaces. 22% larger water tank 33.7-hp Kubota three-cylinder water-cooled...

    Product • September 6th, 2007

  • BW284 Vibratory Roller

    Bomag BW284 Vibratory Roller The BW284 tandem-drum vitratory roller is specifically designed to meet Superpave paving project demands. 84-in. drum width 185-hp Cummins diesel engine and optimized travel system Operating frequencies up to 4,000 vpm...

    Product • September 6th, 2007

  • Hydraulic Mold Lift

    Power Curbers Hydraulic Mold Lift Power Curbers offers an optional hydraulic mold lift for use with the 5700-C slipform machine. Designed to make slipformed highway barrier or parapet construction easier Allows operator to easily and quickly...

    Product • September 6th, 2007

  • BW190AD-4 HF

    Bomag BW190AD-4 HF The BW190AD-4 HF features slanted drum support legs, high curb clearance and a clear view of the entire drum surface. + 79-in.-wide drums 131-hp Deutz water-cooled diesel engine Delivers 28,800 lbs. of centrifugal force in low...

    Product • September 6th, 2007

  • SW300 Series Rollers

    The SW300-1, SW320-1 and SW330-1 double-drum rollers have 39-, 47- and 51-in. drum widths, while the TW320-1 and TW330-1 steel/pneumatic tire rollers offer 47- and 51-in. vibratory drums. Boast a high frequency of 4,000 vpm, yet maintain 10 to 12...

    Product • September 5th, 2007

  • Vogele

    Company • August 29th, 2007