For Construction Pros

Technical Data Sheet: Falcon MINI Asphalt Recycler & Hot Box Reclaimer

Document • March 29th, 2013

Technical Data Sheet: Falcon Truck Mounted Slip-In Model Asphalt Recycler & Transporter

Document • March 29th, 2013

Technical Data Sheet: Falcon Dump Box Model Asphalt Recycler & Heater Trailer

Document • March 29th, 2013

Technical Data Sheet: Falcon Trailer Model Asphalt Recycler & Hauler

Document • March 29th, 2013

Falcon MINI 1/2- to 1-ton Asphalt Recycler & Hot Box (Slip-in or Trailer)

The Falcon MINI asphalt recycler and hot box comes in 1/2- and 1-ton capacities as either a slip-in (truck mountable) unit or a trailer model. It is designed to be a companion to infrared repair equipment, used with vacuum excavation equipment or for...

Product • March 28th, 2013

Video: Falcon Asphalt Recycling Demonstration

Asphalt recycling in a Falcon Asphalt Recycler & Hot Box utilizing the asphalt rejuvenator / release agent spray system

Video • March 28th, 2013

National Pavement Expo 2013

Weren't able to attend the 2013 National Pavement Expo in Nashville, TN? See what you missed by checking out these photos of the show floor. Be on the watch for additional photos in the March/April issue of Pavement Maintenance & Reconstrution .

Media Gallery • March 27th, 2013

PM LeakGuard

Pavemade's PM Leak Guard solves the common problem of asphalt leaking at the start and end of runs. LeakGuard is easy to install and operate on any existing push melters 15 second single bolt installation Easy to operate Comes with 3...

Product • March 26th, 2013

SX-4e Reclaimer-Stabilizer

The 450-hp first in Roadtec's new soil stabilizer line allows the operator to change cutter-drum speeds on the go with a selector knob in the cab

Product • March 25th, 2013

RX-100e Milling Machine

Roadtec, Inc. introduces the the RX-100e to its line of milling machines. The RX-100e is a highly maneuverable mill with a base cutting width of 20-in. and the capability of cutting 8-in. deep. The weight, power and dimensions make it the perfect...

Product • March 25th, 2013

BM1200/30-2 Milling Machine

BOMAG’s BM1200/30-2 cold planer milling machine features a centrally mounted cutting drum that allows precise milling near walls, curbs and other obstructions. Standard cutting width of 47.2 in. Ideally suited for shoulder repair, utility and...

Product • March 25th, 2013

Planer Bits

Dynapac presents its line of planer bits compatible with any model or make of road surface planer. Range in size from 350 mm to 2,200 mm Specific selections designated for use with asphalt, concrete or both Come in boxes of 50 Specs...

Product • March 25th, 2013

Milling Up Missouri

APAC rents BOMAG milling machine from Van Keppel for road repair blitz

Article • March 13th, 2013

Inspection, Maintenance & Upgrade Program

Bergkamp's Inspection, Maintenance & Upgrade Program provides a wide range of services — from helping contractors identify small maintenance issues with their slurry seal and micro surfacing pavers to conducting a full remanufacture of a unit...

Product • March 13th, 2013