For Construction Pros

New Road Milling Tools Offer Improved Rotation and Strong Holding Power

The new Road Razor II tools from Kennametal feature an improved retainer clip design over the previous generation; excellent penetration in rock, asphalt, and other tough, abrasive materials; and a strong fit for long service life.

Press Release • December 21st, 2009

Road Razor II

Road Razor II road milling/stabilizing tool features an improved retainer clip design over the previous Road Razor line. Forged body design with enhanced wear characteristics and tips that have been field-proven for good rotation and impact...

Product • December 18th, 2009

Legacy Industrial

Legacy Industrial is a supplier of concrete repair kits, joint/crack fillers, epoxy floor coatings, roof coatings, stair-tread solutions and absorbent materials.

Company • December 17th, 2009

infrared pre-heating system

An infrared pre-heating system specifically designed for heating and drying a variety of aggregate and RAP materials has been developed by Ray-Tech Infrared Corp. Typical system is composed of multiple heating units, which are mounted in series...

Product • December 16th, 2009

Maintenance Cuts Paver and Milling Machine Costs

To keep road projects on track, and downtime to a minimum, contractors should follow recommended maintenance practices for paver and milling machine undercarriage systems. This includes maintaining proper track tension, regular cleaning and periodic...

Article • December 10th, 2009

Micro Surfacing Pavement Maintenance Process Addresses Severe Concrete Road Surface Issues and Improves the Ride Smoothness of the Final Overlay

CDOT utilizes micro surfacing pavement maintenance process to address severe concrete road surface issues and improve the ride smoothness of the final stone matrix asphalt overlay.

Article • December 10th, 2009

6-ft. Zipper

The 6-ft. wide zipper is designed for front-end loaders. Quickly mounts on the bucket of most loaders Pulverizes asphalt up to 12 in. thick and 72 in. wide Powered by a 203-hp Cummins turbo diesel engine 695 ft.-lbs. of torque Transports on a...

Product • December 9th, 2009

TwisBen LLC

Company • December 7th, 2009

ProLine Cold Asphalt Patching Material

The ProLine Cold Asphalt Patching Material is a permanent polymer modified material that is ready to use and easy to install (just pour and compact). ProLine patching material works in water and cold weather. It will feed from a patching truck at...

Product • December 7th, 2009

Logan County Asphalt Co.

Company • December 7th, 2009

Q & A on Asphalt Maintenance

Asphalt Institute Senior Regional Engineer Wayne Jones discusses the maintenance and preservation issues facing managers and crews

Press Release • December 7th, 2009

EDGE Cold Planers

EDGE Standard-Duty and Extreme-Duty Cold Planers mill asphalt and concrete quickly. Standard-duty models are available in six widths from 12 to 36 in. and depths up to 6 in. The EDGE Extreme-duty cold planer is possibly the most advanced planer on...

Product • November 30th, 2009

SealMaster SP Squeegee Machines

The "Workhorse" of equipment when it comes to laying down pavement sealer. The SealMaster SP Squeegee machines are available in 320- and 575-gal. capacities.

Product • November 30th, 2009

Model X1-300

Dual rear wheel drive self-propelled sealcoating unit 300-gal. capacity Powered by a 24-hp Honda engine Features 8-ft. hydraulic angle squeegee, water tank, 4-in. material valve, 1 1/2-in. agitator shaft, reversible agitation, and a large...

Product • November 30th, 2009

Everpads Cutting Teeth

The Everpads Cutting Teeth are designed for maximum performance on high-production cold milling planers. High-quality carbide tip and fortified welding with hardened body Wavy-edged, wear-resistant washer facilitates rotating and extends...

Product • November 23rd, 2009

Preservation

Click here to visit...

Events

Industry Links

e-Books & Supplements

Preservation

Click here to visit...

Sign Up

Subscribe

Events

Industry Links

e-Books & Supplements