Single FastMelt 650

December 1, 2017
Advanced Striping Equipment
Titan 8 Ds 7787 Cc[3]
Advanced Striping Equipment White Bg Png (002)

Combine the FastMelt 650 with the ThermoMark 250 handliner and get an all-in-one portable melting system built for productivity with the best ROI in the industry.

  • FastMelt 650 is a self-contained thermoplastic system that holds 650 lbs. of material
  • Place in the back of any standard pickup, flatbed truck or work trailer for easy transport and faster refills
  • ThermoMark 250 thermoplastic applicator features a 250-lb. reservoir constructed with extremely durable aluminum.
  • ThermoMark 250 exclusive features include an insulated reservoir and a modular bolt-together design
  • Honda GX390CC engine


Request More Information
Fill out the form below to request more information about Single FastMelt 650
Latest
Crafco Makes Upgrades to Supershot 125 Melter
Crafco Makes Upgrades to Supershot 125 Melter
A new ergonomically designed wand makes the equipment lighter and easier to operate for contractors.
February 15, 2016
944 Thermotrack more picture features 56b8b0a230dd3
TT540-6B Accu-Therm Infrared System
February 8, 2016
Critical Success Factors: Getting and Keeping Key Business
October 9, 2015
pavement markings 5612eaae86595
Complete Line of Pavement Markings
October 5, 2015
MRL Road Striping 039 555b920abbc80
Striping 75 sales up 15% over 2014
Contractors’ striping-only sales near $112 million.
June 15, 2015
This LPG Alt fuel vehicle is production ready and wrapped in camoflauge to showcase NiteHawk's committment to DAV
NPE Product Unveilings
February 4, 2014
Graco Acquires EcoQuip Inc.
Vapor-abrasive blasting equipment represents new technologies and applications for Graco to offer its global distribution network.
December 12, 2013
Rayner PavementSaver II
Here's What's Happening at NPE's "Live" Demonstrations
National Pavement Expo will host two days of live outdoor demonstrations by 16 exhibitors at the 2014 NPE show, Jan. 6-11 in Fort Lauderdale, FL
November 18, 2013
“Basically we stripe to shift traffic from old asphalt to new asphalt just after the paver is done,” says Sonny Younce, president. “We might have a shoulder built or a wedge constructed to carry the traffic after it shifts and once the paver constructs that we go in and mark it. Sometimes lanes shift when they’re building another lane completely.”
A Summer of 80 Million Linear Feet
April 30, 2013
Hand-held torches work well for installing preformed thermoplastic.
"How-to" Tips for Preformed Thermoplastic
November 5, 2012
When considering adding preformed thermoplastic to their business and when selling it to customers contractors have to consider more than the up-front cost of the material. They need to take into consideration other factors and talk about those factors with the client.
How Preformed Thermoplastic Can Extend Your Season
Pavement marking doesn’t have to stop when the temperature drops
October 18, 2012
Pinholes from subsurface water.
Apply the Best Thermoplastic Pavement Marking
Problems occurring during thermoplastic application can be attributed to a few factors, and knowing what the problems and causes are is the first step to preventing the problem.
August 17, 2010
When the handliner is empty the operator returns to the melter and fills it up again. The advantage is one of productivity and efficiency as an operator or crew can put down much more material on the pavement when using melter kettles to heat it. Note the face shield.
A guide to entering the thermoplastic pavement marking business
August 13, 2008
Thermoplasticpremelters 10087912
Thermoplastic Pre-Melters
September 19, 2007
Falcon Kettles On Trailer No Logos
Falcon Thermoplastic Melting Kettles
September 6, 2007
Premelters
September 6, 2007
Thermoplastic premelting kettles
September 6, 2007
Mrlthermoplasticpremeltingkettles 10086681
MRL Thermoplastic Pre-Melting Kettles
September 6, 2007
1175097744303 10298688
Hot tips to keep thermoplastic equipment in top form
Thermoplastic equipment maintenance.
March 28, 2007