FS-600 Portable Rebar Cutter/Bender
- Will both cut and bend up to 3/4-in. (#6) grade 60 rebar
- 180-lb. machine
- Plugs into standard 110 volts
- Quickly cut rebar to length or accurately fabricate stirrups, hooks and 3-D bends at the jobsite or shop
Fascut Industries Inc.
Lenton Plastic Rebar Supports
- Use in tilt-up, precast and cast-in-place slab and deck construction
- Line includes Rebar Chairs, Slab/Beam Bolsters and Wagon Wheels
- Excellent chemical resistance
- Natural color blends in with concrete
- Qualify as CRSI Class 1 bar supports
Rebar Cutter Blades
Rebar Blades offers replacement cutting blades for all makes and models of rebar cutters. Blades are in stock and ready to ship the same day they are ordered. And if blades for your model are not currently available they can be made and then stocked for you.
Rebar Blades LLC
Rebar Cutter S32
- Production Capacity: Maximum Diameter is 36 mm in normal steel
- Cut single bars up to 36 mm
- Up to four 12 mm bars can be cut at a time
- Cut speed of 40 cuts per minute
- Fully closed body made of special steel
- Motor:3-hp, 2.2kW, 2880 rpm, 3-phase, 50 Hz, 4.8 amp, 380 to 440 V. Model- Avadhut – Frame 90 Motor Rating – Continuous Insulation Class – F Class Enclosure Type – TEFC Duty Rating – S1
Swastik Entech Pvt. Ltd.
DF 16 Rebar Tier
The DF 16 rebar tier is a simple, mechanical unit that allows an operator to tie up to 1,000 knots per hour.
- Weighs less than 5 lbs. and allows operator to work in a comfortable upright position
- One-hand operation with no special training or experience required
- Loops at each end of the tie wire automatically interlock and are twisted when the device is withdrawn
- Creates a tighter knot and each tie is secured without cutting
Wacker Neuson Corporation
RB397 Rebar Tying Tool
- Can tie rebar up to #5 x #6
- 2,000 ties per charge with a 14.4v lithium-ion battery
- Brushless motor
- Trigger lock
- Torque adjustment dial
- Automatic shut-off when not in use
- Reversible belt hook
- Kit includes carrying case, charger and battery pack
Max USA Corp
MetalliScanner MT 6
- Capable of finding metal up to 6 in. deep in concrete
- Differentiates between ferrous and non-ferrous metal targets
- Indicates target depth in inches and centimeters
- Position accuracy to within ± 1/2 in.
Aztec Straddle Chair
- Fits rebar #3 to #11
- Covers height ranges from 3 to 7 3/4 in.
- Staple down feature and two sizes per chair
- Product applications include side form spacer, tilt-up, precast and D.O.T. projects
Rebar Safety Cap
- Protect employees and equipment from exposed rebar, pipe and anchor bolts
- High visibility orange color
- Made from colored polypropylene LLPE Blend
- Fit #3-#8 rebar
Rebar Benders and Cutters
- Powered by 10,000 psi hydraulic pumps
- Operate with a single hand
- Bend or straighten rebar up to 135°
- All models rotate 360°
- Bending and cutting capacities of #6, 3/4" or #8, 1" 60-grade rebar
EZE Bend, Inc.
Twister Rotary Tying Tool
The Twister Rotary Tying Tool is designed to cut, twist and tie rebar in place. The tool cuts excess wire on closing. No batteries or electricity are required. With the Twister Rotary Tying Tool the operator controls the tightness of the tie.
Gensco Equipment Company
Quick Rebar Clamp Valet
- Forged steel pieces that when used with a piece of standard #4 or #6 rebar create a strong, temporary clamp to reduce the need for lumber in concrete forming
- Replace wood stakes used for batter boards, footings and edge board in concrete construction
- Design is based off of a traditional Roman clamp that relies on pressure created by angling metal pieces in a binding action, rather than nails and lumber or other connecting methods, to form a clamp
M.B. Tools, Inc.