Asphalt Contractor Product Showcase March 2007

Caterpillar 990H Wheel Loader
The 990H replaces the 990G Series II, yet retains features such as an impeller clutch torque converter, Rimpull Control System and STIC control system.

  • Loads 60- to 70-ton trucks in the standard lift arrangement and 100-ton trucks in the high-lift arrangement
  • 16.5-ton rated payload in the standard lift arrangement and a 171,642-pound operating weight
  • Bucket capacities from 11.0 to 12.0 cubic yards
  • 627-hp Cat C27 ACERT engine

IMT SiteStar Lube Skid
The SiteStar lube skid delivers contaminant-free oil, coolant and water to jobsites.

  • Fits in the back of IMT Dominator mechanics trucks
  • Consists of impact-resistant polyethylene tanks and hose reels
  • Three integrated lift points allow for easy removal
  • 220-gallon capacity split between 55-gallon tanks available in eight possible configurations
  • 50-inch width allows for installation in any properly rated truck

Terex Load King SA70
The 70,000-lb. SA70 hydraulic sliding axle trailer includes a 12,000-pound line pull winch (20,000-pound optional) and a 6.5-degree load angle.

  • 15-degree dump angle
  • 20 D-Rings and multiple chain slot design
  • Features 80/100 KSI steel, cambered deck beams, crossmembers on 8-in. centers and Apitong decking
  • Hendrickson Turner HT air ride suspension

Sirocco 3K HTI from Airstar America
The Sirocco 3K HTI from Airstar America is designed to replace traditional floodlights on light towers.

  • Glare-free light
  • Can be adapted to existing tower
  • Will illuminate 72,000 square feet, 360 degrees with 300,000 lumens

Anton Paar SmartPave DSR
The SmartPave from Anton Paar is a dynamic shear rheometer (DSR) combined with a new Peltier heating system.

  • New easy-to-use software
  • Fully automatic temperature calibration (no water flow around sample)
  • Fast Peltier heating and cooling

Zanetis Skid-Steer Cold Planers
These second-generation cold planer attachments are rated for systems with output up to 42 gpm at 5,000 psi.

  • Planetary torque hub driven by a piston motor
  • Driveline submerged within the chassis, eliminating the possibility of damage and increasing side clearance
  • Available in 16-, 18-, 24-, 30- and 40-inch cutting widths

MobyDick Dragon
MobyDick's Dragon drive-through wheel washing system is automatically activated via a sensor.

  • Wash area provides one complete wheel revolution for light tire soiling applications
  • Compact dimensions for easy transport and setup
  • Automatic water recycling

InstroTek Model 3500 Xplorer
The model 3500 Xplorer moisture density gauge from InstroTek Inc. features the most up-to-date electronics, improved performance and straight forward, simple operation.

  • Menu options are easy to read and navigate
  • Backlit LCD screen and special scroll functions allow operators to easily read the two-line display during day or nighttime work
  • Unit has been thoroughly tested for ruggedness and accuracy
  • Battery Saver and InteliCharge extend battery life keeping the gauge on the job instead of on the charger

Topcon RT-5SW Dual Slope Laser
The long-range, dual-slope RT-5SW laser has five-arc-second accuracy, less than 1/32nd of an inch per 100 feet.

  • SmartLine automatic guide alignment system
  • Automatic grade matching
  • Remote control enables operation from 1,000 feet.
  • Verify adjustments from machine cab

Eager Beaver Paver PT Series Trailers
Paver PT Series is designed to safely load rollers, pavers and milling machines.

  • Low front approach
  • Tapered ramps and gradual slope
  • Low load angle

Loading