Engine Technology

Cummins QSB Tier III Engines

The next-generation QSB four- and six-cylinder engines meet the EPA's Tier III emissions requirements.

  • Rated from 110 to 275 hp
  • State of the art electronics, common-rail fuel systems and increased displacement
  • Six-cylinder unit includes up to an 18% torque increase, while the four-cylinder provides an 18% increase
  • John Deere PowerTech 12.5L Engines

    The PowerTech 12.5L engines were developed with Tier II requirements in mind.

  • Four-valve cylinder head and overhead cam
  • Electronic unit injectors allow for higher injection pressures to help meet emission regulations
  • Turbocharger improves air flow and engine performance
  • Deutz 1013 Series Diesel Engines

    The 1013 Series of water-cooled, four- and six-cylinder, in-line diesel engines offers power ranges from 110 to 270 hp.

  • Fulfill Tier II EPA emissions regulations
  • Integrated cooling system
  • 1.2L displacement per cylinder or 4.8 to 7.2L displacement
  • Hatz W35 Series Engines

  • The W35 series liquid-cooled engines feature cast aluminum crankcase halves split vertically, replacing approximately seven parts in a conventional engine.
  • Gear-driven camshaft and water pump
  • Standard flywheel alternator available with 12- and 24-volt systems
  • 7- to 42-hp output
  • Comply with various worldwide emission regulations for exhaust and noise
  • Kubota E-Series Engine

    The E-Series diesel engine features E-TVCS (three vortex combustion system) technology.

  • Offers reduced soot, unburned HC and CO emissions
  • Produces less NOx than traditional direct-injection systems
  • Briggs & Stratton Vanguard Big Block Engines

    The Vanguard V-Twin Big Block air- and liquid-cooled commercial engines are available in the 25- to 35-hp range.

  • V-twin/overhead valve technology
  • Intake and exhaust system and large muffler for quiet operation
  • Lightweight aluminum block
  • Centrifugal, multi-stage industrial air cleaner
  • Honda GS Series

    The GS series of engines includes the 6.0-hp GS190 horizontal shaft and 6.5-hp GSV190 vertical shaft models.

  • Air-cooled, four-stroke, OHC single-cylinder design
  • Uniblock construction
  • Internal timing belt design
  • Cast iron cylinder sleeve and redesigned piston with three-piece oil control ring
  • Dual-stage air filter with oiled pre-filter
  • Meet or exceed CARB and 2006 EPA emissions requirements
  • Honda GS Series

    The GS series of engines includes the 6.0-hp GS190 horizontal shaft and 6.5-hp GSV190 vertical shaft models.

  • Air-cooled, four-stroke, OHC single-cylinder design
  • Uniblock construction
  • Internal timing belt design
  • Cast iron cylinder sleeve and redesigned piston with three-piece oil control ring
  • Dual-stage air filter with oiled pre-filter
  • Meet or exceed CARB and 2006 EPA emissions requirements
  • Detroit Diesel Series 60

    The Series 60 heavy-duty diesel engine features electronic engine control and protection.

  • Ratings from 300 to 825 bhp at 1,200 to 2,300 rpm
  • Overhead camshaft eliminates pushrods for more optimized cylinder head design
  • Available features include cruise control, vehicle speed limiting and fuel economy reports
  • Loading