Cut-off machines and diamond chainsaws are the two most common concrete cutting tools. Their uses overlap quite a bit, but they are not interchangeable. By understanding the differences between these two types of equipment, you can make the right choice for your next job.
Cut-off machines — the industry standard
The go-to choice for most concrete cutting jobs, cut-off machines are hand-held saws used to cut concrete, asphalt and metal. They use either a composite resin abrasive wheel or diamond blade to cut in various applications. Typically available in 12- or 14-inch sizes, cut-off machines can be powered by a two-stroke gas engine, a hydraulic power unit, an air compressor or an electric motor.
The choice of power source depends on the application. According to Tom Carroll at CS Unitec, electric saws are popular with some operators because they’re lightweight, less noisy and simpler to use than other types of cut-off machines. They aren’t as powerful, however, and can take longer to complete a job.
“An electric cutter is preferred in enclosed environments,” notes Kevin Axt at Hilti. “In cases like those, it’s less about performance and more about what’s needed in that particular situation.”
Hydraulic saws, on the other hand, have the highest power-to-weight ratio. They’re convenient because most contractors have a hydraulic power unit on hand, but they’re more expensive and less forgiving than a pneumatic saw, for example.
“They can build up pressure in the hydraulic line,” Carroll notes, which can result in difficult handling. “Also, a leak in a hydraulic line can be dangerous and expensive.”
Pneumatic saws are also convenient, since air compressors are ubiquitous on jobsites. Operation is simple and has fewer potential hazards, Carroll says. “If the blade stalls, you just release the air pressure,” he says, adding there’s also no risk of fluid leaks. Pneumatic saws are lightweight and simple to maintain as well.
Axt at Hilti points out that pneumatic saws can be more expensive to use, however, due to the need for a compressor and the diesel fuel to power it.
Most popular among the various types of cut-off machines are gas-powered units. These tools offer the advantages of portability and familiarity, but they do require more maintenance.
Besides power requirements and maintenance, there’s also the question of weight vs. performance. Operators appreciate a lighter saw because they’re easier to use, but there is a trade-off. “It depends on what the operator really wants,” Axt says. “If the saw is lighter, it will cut shallow with more passes, so it might take longer. A heavier saw, on the other hand, will cut deeper and faster, but is heavier, which can make it harder to handle for some operators.”
He continues, “For some, time is money. Others prefer to save wear and tear on the operator.”
There are several things operators should be aware of when using a cut-off machine. “The end-user should read, understand and follow the directions and warnings in the instruction manual,” says Steve Parmentier, manager of strategic accounts at Stihl Inc. He notes end-users should also have all the appropriate personal protective equipment as outlined in the instruction manual.
Diamond chainsaws meet a unique need
A diamond chainsaw is a tool designed like a wood-cutting chainsaw, with a power head, guidebar and chain which is driven by a sprocket from the power head around the guidebar, explains Bill Bray, vice president of sales and marketing at ICS, Blount Inc. As its name suggests, the chain on a diamond chainsaw incorporates diamond segments that are laser welded to the chain in place of the cutting teeth typical with a wood saw. The diamond segments, like on a traditional circular diamond blade, essentially create a grinding action that wears away the concrete, brick or other aggregate material. This grinding action creates a very safe cutting operation with none of the kickback that is associated with a wood chain.