ScanDust 9000 World Series

Scanmaskin's ScanDust 9000 World Series dust collectors are available in both an electric and propane version.

February 4, 2020

Scanmaskin Scan Dust 9000 Ws

Scanmaskin's ScanDust 9000 World Series dust collectors feature a patented, built-in pre-separator to separate dust into two stages and provide up to 90% pre-separation.

Available in electric or propane version
32 Teflon coated sock filters and two HEPA 14 filters with 99.995% filtration rate
Electric version equipped with frequency control to adjust power and speed
Filter guard warns when filters need cleaning
Longopac bag system
Height-adjustable cyclone
Solid rear wheels and 200 mm large swivel wheels
Jet-pulse cleaning system pulses filters to clean without coming in contact with harmful dust
Filter area: 4.2 square meters

Fill out the form below to request more information about ScanDust 9000 World Series

The use of abrasion resistant steel in manufacturing of conveyor pulleys supports durability in demanding environments and handling bulk materials.

Superior Industries Upgrades Chevron Pulley

The use of abrasion resistant steel in manufacturing of conveyor pulleys supports durability in demanding environments and handling bulk materials.

Shortly after its origin, the Cary-Lift product line was acquired by Pettibone, and it remains a popular solution for pipe, pole, and log handling to this day.

Pettibone Celebrates 75th Anniversary of Cary-Lift

Pettibone announced that it is celebrating the 75th anniversary of the creation of the Cary-Lift.

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Makita Unveils 40V MAX XGT Battery-powered Backpack Vacuum

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

Multiquip Offers Battery-powered GloBug Lighting Solutions

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

Makita Offers 40V MAX XGT Shear Wrench

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

Inspired by You, Designed for the Job | JLG®

Inspired by You, Designed for the Job | JLG®

Every job is a new way to leave your mark on tomorrow. Don’t settle for anything less than a partner who shares your drive to do your best work.

Skf Lincoln Gear Oil Dispensing Units

SKF Lincoln Unveils Mityvac Gear Oil Dispensing Units

The gear oil handling systems utilize compressed air for clean fluid handling.

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

DENIOS Launches BatterySafe Cases for Lithium-ion Batteries

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

2521 10 F

Milwaukee Introduces M12 FUEL Circular Saw

The Milwaukee M12 FUEL Circular Saw is designed for cross-cutting sheet goods and dimensional lumber.

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

Milwaukee Launches M12 Brushless Copper Tubing Cutter

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

The new products include the 20V MAX* Hydraulic Knockout Tool (DCE600), 20V MAX* XR Brushless Cordless Mid-Size Bandsaw (DCS378) and 20V MAX* XR Brushless Cordless Dual-Trigger Bandsaw (DCS379).

DEWALT Releases 20V MAX Knockout Tool and Bandsaws

The new products include the 20V MAX Hydraulic Knockout Tool (DCE600), 20V MAX XR Brushless Cordless Mid-Size Bandsaw (DCS378) and 20V MAX XR Brushless Cordless Dual-Trigger Bandsaw (DCS379).

Stand the Test of Time | JLG®

Stand the Test of Time | JLG®

Your work is meant to weather through some of the toughest conditions. Your equipment should do the same. That's why the best contractors trust JLG®.

Diablo made dura-carbide withstands up to 1,800°F of intense heat to combat rebar hits.

Diablo Tools AMPED Rebar Demon 4-cutter Hammer Drill Bit System

Diablo made dura-carbide withstands up to 1,800°F of intense heat to combat rebar hits.

New Trailblazer 330 machines are 86 lbs. lighter and 13% smaller than previous models.

Miller Electric Launches Trailblazer 330 Welders

New Trailblazer 330 machines are 86 lbs. lighter and 13% smaller than previous models.

EnviroMat creates temporary access and vehicle roadways, while XtremeMat serves as a heavy-duty solution for haul and access roads.

DICA Offers EnviroMat and XtremeMat from Ground Guards U.S.A.

EnviroMat creates temporary access and vehicle roadways, while XtremeMat serves as a heavy-duty solution for haul and access roads.

The Bobcat 265 is available in gas and LP models, while the Trailblazer 330 comes in gas and diesel.

Miller Electric Introduces Bobcat 265 Air Pak and Trailblazer 330 Air Pak Welders

The Bobcat 265 is available in gas and LP models, while the Trailblazer 330 comes in gas and diesel.

Crafted from military-grade 1000 denier nylon mesh, this vest features 3M reflective strips and heat-sealed loops for securing Diamondback accessories.

Diamondback 701 Tool Vest with Twiceme

Crafted from military-grade 1000 denier nylon mesh, this vest features 3M reflective strips and heat-sealed loops for securing Diamondback accessories.

Equipment dealers have expressed great concern with the rule, particularly as it relates to service and delivery trucks, as well as the cost increases and equipment delivery delays that will ensue.

AED Opposes California Rule on Internal Combustion Trucks

The ACF regulation requires fleet operators to phase out their internal combustion trucks and replace them with zero-emission trucks, starting in 2024.

The pressure washers come standard with quick connect nozzles, a 50-ft. high pressure hose and dual lance with trigger gun for cleaning power.

Mi-T-M Launches HSP Series Pressure Washers

The pressure washers come standard with quick connect nozzles, a 50-ft. high pressure hose and dual lance with trigger gun for cleaning power.

The battery-powered chain hoist provides the ability to lift one metric ton (2,204 lbs.) at 20-ft. lift height.

Milwaukee Tool and Columbus McKinnon Unveil M18 Compact 1-Ton Chain Hoist with One-Key

The battery-powered chain hoist provides the ability to lift one metric ton (2,204 lbs.) at 20-ft. lift height.

With its 8-in. rubberized wheels, the KNAACK Armored Transport can tackle common obstacles on the jobsite like loose gravel, rebar and electrical cords.

KNAACK Introduces Armored Transport Cart

With its 8-in. rubberized wheels, the KNAACK Armored Transport can tackle common obstacles on the jobsite like loose gravel, rebar and electrical cords.

The 1Key Ultralock lock-and-latch system guards against theft and the versatile key allows users to manage one truck or an entire fleet of truck boxes by coding every truck box to the single 1Key.

WEATHER GUARD Launches 2024 Saddle and Lo-Side Boxes

The 1Key Ultralock lock-and-latch system guards against theft and the versatile key allows users to manage one truck or an entire fleet of truck boxes by coding every truck box to the single 1Key.

The new headache racks are available in four styles, including a Half Bar, Hex, Louvered and Open Frame.

WEATHER GUARD Releases Headache Racks for Truck Protection

The new headache racks are available in four styles, including a Half Bar, Hex, Louvered and Open Frame.

Inspired by You, Designed for the Job | JLG®

Inspired by You, Designed for the Job | JLG®

Every job is a new way to leave your mark on tomorrow. Don’t settle for anything less than a partner who shares your drive to do your best work.