MK-4000 Self-Propelled Concrete Saw

May 13, 2008

MK Diamond Products, Inc.

4000 Kubota 24in 10237125

Largest in the MK Diamond line of concrete saws
Blade capacity from 18 to 36 in.
Available with either 48-hp Hyundai gas, 44-hp Kubota diesel or 30-hp Deutz diesel engine
Low emissions and meets all EPA and CARB requirements
Removable panels for maintenance accessibility
Right/left mounting of blade guard with quick release control and spade mounts
Other features include electro-hydraulic pump, 7 V-belt drive system, and enclosed, sealed blade shaft with continuous oil bath lubrication system

Fill out the form below to request more information about MK-4000 Self-Propelled Concrete Saw

Shortly after its origin, the Cary-Lift product line was acquired by Pettibone, and it remains a popular solution for pipe, pole, and log handling to this day.

Pettibone Celebrates 75th Anniversary of Cary-Lift

Pettibone announced that it is celebrating the 75th anniversary of the creation of the Cary-Lift.

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Makita Unveils 40V MAX XGT Battery-powered Backpack Vacuum

The GCV08 features a two-stage HEPA filtration system that captures 99.97% of particulates 0.3 microns and larger.

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

Multiquip Offers Battery-powered GloBug Lighting Solutions

Both models have a three-step dimming switch, enabling the operator to control the desired level of brightness, extend battery run time and reduce light pollution.

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

Makita Offers 40V MAX XGT Shear Wrench

The 40V max XGT Shear Wrench (GTW01) is a cordless fastening solution with 593 ft. lbs. of maximum fastening torque.

The new facility, focused on high complexity and high variation specialty fifth wheel manufacturing, will include the current SAF-HOLLAND Wylie, Texas operation.

SAF-HOLLAND to Build New Factory in Texas

The new Rowlett facility is the next phase of the SAF-HOLLAND manufacturing optimization and vertical integration strategy to increase capacity output that began with the opening of its Piedras Negras, Coahuila, Mexico plant in August 2023.

Top 3 Tips for Purchasing a Diesel Diagnostic Tool

Top 3 Tips for Purchasing a Diesel Diagnostic Tool

A quality diagnostic tool is key for a smooth repair process. With the right tool, technicians have support in making comprehensive repair decisions.

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

DENIOS Launches BatterySafe Cases for Lithium-ion Batteries

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

2521 10 F

Milwaukee Introduces M12 FUEL Circular Saw

The Milwaukee M12 FUEL Circular Saw is designed for cross-cutting sheet goods and dimensional lumber.

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

Milwaukee Launches M12 Brushless Copper Tubing Cutter

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

The new products include the 20V MAX* Hydraulic Knockout Tool (DCE600), 20V MAX* XR Brushless Cordless Mid-Size Bandsaw (DCS378) and 20V MAX* XR Brushless Cordless Dual-Trigger Bandsaw (DCS379).

DEWALT Releases 20V MAX Knockout Tool and Bandsaws

The new products include the 20V MAX Hydraulic Knockout Tool (DCE600), 20V MAX XR Brushless Cordless Mid-Size Bandsaw (DCS378) and 20V MAX XR Brushless Cordless Dual-Trigger Bandsaw (DCS379).

TennaCAM 2.0 Heavy Equipment is fully integrated with TennaCANbus, which allows it to deliver ECU data alongside video telematics.

Tenna Unveils TennaCAM 2.0 Heavy Equipment Camera

TennaCAM 2.0 Heavy Equipment is fully integrated with TennaCANbus, which allows it to deliver ECU data alongside video telematics.

Top 3 Tips for Purchasing a Diesel Diagnostic Tool

Top 3 Tips for Purchasing a Diesel Diagnostic Tool

A quality diagnostic tool is key for a smooth repair process. With the right tool, technicians have support in making comprehensive repair decisions.

New Trailblazer 330 machines are 86 lbs. lighter and 13% smaller than previous models.

Miller Electric Launches Trailblazer 330 Welders

New Trailblazer 330 machines are 86 lbs. lighter and 13% smaller than previous models.

EnviroMat creates temporary access and vehicle roadways, while XtremeMat serves as a heavy-duty solution for haul and access roads.

DICA Offers EnviroMat and XtremeMat from Ground Guards U.S.A.

EnviroMat creates temporary access and vehicle roadways, while XtremeMat serves as a heavy-duty solution for haul and access roads.

The Bobcat 265 is available in gas and LP models, while the Trailblazer 330 comes in gas and diesel.

Miller Electric Introduces Bobcat 265 Air Pak and Trailblazer 330 Air Pak Welders

The Bobcat 265 is available in gas and LP models, while the Trailblazer 330 comes in gas and diesel.

Crafted from military-grade 1000 denier nylon mesh, this vest features 3M reflective strips and heat-sealed loops for securing Diamondback accessories.

Diamondback 701 Tool Vest with Twiceme

Crafted from military-grade 1000 denier nylon mesh, this vest features 3M reflective strips and heat-sealed loops for securing Diamondback accessories.

Equipment dealers have expressed great concern with the rule, particularly as it relates to service and delivery trucks, as well as the cost increases and equipment delivery delays that will ensue.

AED Opposes California Rule on Internal Combustion Trucks

The ACF regulation requires fleet operators to phase out their internal combustion trucks and replace them with zero-emission trucks, starting in 2024.

The pressure washers come standard with quick connect nozzles, a 50-ft. high pressure hose and dual lance with trigger gun for cleaning power.

Mi-T-M Launches HSP Series Pressure Washers

The pressure washers come standard with quick connect nozzles, a 50-ft. high pressure hose and dual lance with trigger gun for cleaning power.

The battery-powered chain hoist provides the ability to lift one metric ton (2,204 lbs.) at 20-ft. lift height.

Milwaukee Tool and Columbus McKinnon Unveil M18 Compact 1-Ton Chain Hoist with One-Key

The battery-powered chain hoist provides the ability to lift one metric ton (2,204 lbs.) at 20-ft. lift height.

With its 8-in. rubberized wheels, the KNAACK Armored Transport can tackle common obstacles on the jobsite like loose gravel, rebar and electrical cords.

KNAACK Introduces Armored Transport Cart

With its 8-in. rubberized wheels, the KNAACK Armored Transport can tackle common obstacles on the jobsite like loose gravel, rebar and electrical cords.

The 1Key Ultralock lock-and-latch system guards against theft and the versatile key allows users to manage one truck or an entire fleet of truck boxes by coding every truck box to the single 1Key.

WEATHER GUARD Launches 2024 Saddle and Lo-Side Boxes

The 1Key Ultralock lock-and-latch system guards against theft and the versatile key allows users to manage one truck or an entire fleet of truck boxes by coding every truck box to the single 1Key.

The new headache racks are available in four styles, including a Half Bar, Hex, Louvered and Open Frame.

WEATHER GUARD Releases Headache Racks for Truck Protection

The new headache racks are available in four styles, including a Half Bar, Hex, Louvered and Open Frame.

The MAC-Link represents the evolution of PSG's Modular Access Control (MAC) product line, bridging the gap between large-scale infrastructure projects and small city-oriented construction sites.

Portable Solutions Group Introduces MAC-Link Safety Management Solution

The MAC-Link represents the evolution of PSG's Modular Access Control (MAC) product line, bridging the gap between large-scale infrastructure projects and small city-oriented construction sites.

Built to Dig. Built to Last. Peace of Mind Included.

Built to Dig. Built to Last. Peace of Mind Included.

SANY swing boom excavators are compact equipment champs. Powerful and easy to transport. Conquering confined spaces on jobsites across America.