Morbark enters the stump grinder market with the models G52SP and D52SP. With a top speed of 3.2 mph, units feature a patent-pending boom design that creates a 52-in. cutting arc. Other features include a hexagon-shaped cutter wheel and six multi-tipped cutting tools fastened with one bolt each to provide the grinding peformance of 24 teeth.
Bil-Jax AB Elite Grandstand
The AB Elite Grandstand Seating System from Bil-Jax is designed for a wide range of professional and amateur sporting events. The portable system has the ability to tip seats up through a weighted cam mechanism. The tip-up, contoured seats are more comfortable than traditional bench seating and provide a more upscale look.
Ground Heaters Arctic Bear HD
Ground Heaters introduces the new Arctic Bear HD (Heavy-Duty) indirect-fired heater. This patent-pending heater is designed to deliver clean, dry heat while tolerating the most extreme cold-weather conditions. The Arctic Bear HD can withstand ambient temperatures down to -60 degrees F and winds up to 70 mph. Unit features 100-percent stainless-steel firebox and heat exchanger. All hoses and wiring are arctic grade. Powered by a CSA-certified, 10KVA, 240-volt AC, three-phase generator which is driven by a Kubota 1,800-rpm diesel engine, the Arctic Bear HD offers heat output of 500,000 to 850,000 BTU/hr.
MBW R440HC Rammer
The R440HC is powered by a 3-hp Honda four-cycle engine with diaphragm carburetion and has an 11- by 13-in. shoe. The 142-lb. rammer features a low center of gravity, noise-attenuating 4.6-quart fuel tank, four-ply steel and fiber-reinforced bellows and a cool-running delivery system. Unit delivers up to 700 bpm at 3,800 lbs. per blow.
E.D.P. Tech Blade
MK Diamond Products and White Cap Construction Supply recently introduced the E.D.P. Tech (Engineered Diamond Placement Technology) Diamond Blade. Engineered to increase the blade’s cutting efficiency by 65 percent, the E.D.P. allows faster concrete cuts with a blade that will last longer than conventional blades. Available in 12-, 14-, 16- and 20-in. versions, the E.D.P. is designed for general purpose cutting using high-speed cut-off saws, dry concrete cutting and dry brick and concrete block cutting.
Max HN120 Powerlite
The HN120 Powerlite pneumatic concrete pinner is powered by 400-psi technology and is approximately 40 percent lighter and 20 percent smaller than most competitors'tools without sacrificing power. The high-pressure pneumatic system contains enough power to drive .300-in. head pins into concrete. A highly durable metal housing ensures strength and longevity for this tool, but the HN120 maintains a lightweight feel at only 6.4 lbs. The magazine capacity is 50 pins and shoots pins from 1- to 2 1/2-in. in length.
Bosch Bulldog Xtreme
The new Bosch 1-in. SDS-plus Bulldog Xtreme rotary hammers feature a 7.2-amp motor. Vital components such as the piston, striker, impact bolt and guide tube are "dialed in" with tight tolerances to remain concentric. Unit hits at 2.2 ft.-lbs. at zero to 5,800 bpm and drills up to 1,300 rpm.