Allen Engineering Corporation is headquartered in Paragould, Arkansas. The company designs, engineers, manufactures and markets equipment for concrete placing, finishing and paving professionals. Allen Engineering Corporation is family-owned and their Allen Equipment is American-Made. Allen Equipment is sold through a network of “concrete-focused” dealers and rental centers around the world.
Allen's new line of reversible plate compactors features three models for compacting in tight places where space is limited.
Two exciter shafts create strong compaction force for deeper lifts and fewer passes
Up to 9.3 hp
Honda gas-powered and...
The single-direction plate compactors from Allen Engineering are design to compact in confined areas and are available in three models: APC140H, APC160H and APC210H.
Honda GX120 and GX160 gasoline engines
14- to 19-in. working width
The ATC130H and ATC170H mid-size rammers feature high stroke and maximum blows per minute for everyday applications.
GXR120 Honda built specifically for the rammer application
650 to 700 blows per minute
Up to 3,800 sq. ft./hr...
Allen's line of mortar mixers includes 6- and 8-cu.-ft. capacity models. \
Additional paddle for a better mix
Engine covered by rugged hinged engine shroud
High-speed hubs with grease axle bearing
The HDX610 Hydra-Drive Extreme riding trowel features a weight-to-horsepower ratio and hydraulic components including a hydraulic load sensing device designed to make the riding trowel stand out among other hydraulic riders.
46-in. diameter, 6-blade...
The MSP 470 riding trowel features hydraulic power steering with independent manual pitch controls and mechanical drive
44-hp air-cooled Kubota diesel engine
Two 46-in. diameter, 5-blade non-overlapping rotors
Rotor speeds up to 180 rpm...
This line of concrete mixers includes 6-, 9- and 12-cu.-ft. models featuring high-abrasion welded steel drums and heavy-duty cast iron ring gears.
Honda power sources
High-speed hubs with grease axle bearings
Heavy-duty retractable tongue...
The MSP 450 (Mechanical Super Pro) riding trowel features manual steering as well as a new torque converter clutch system, high horsepower and low weight-to-horsepower ratio.
Raised operator platform
Specially designed manual operating...
Allen's RS844 spinning tube paver is a ride-on, steerable roller screed.
8-in. diameter polyurethane coated drive rollers
44-hp Kubota Turbo Diesel engine
Widths from 14 to 34 ft. with working widths of 12 to 32 ft.
Drive Tube and Paving Tube...
This line of magnesium concrete finishing hand tools are specifically designed to improve floor or pavement levelness.
Each tool comes standard with three 6-ft., snap-together aluminum handles
Choose the Rock-It or Equalizer pitch adjusting head...
The HDX 750 all hydraulic-powered riding concrete trowel - the newest in Allen's series of Hydra-Drive Extreme Allen Riders - is powered by a 74-hp Kubota Turbo Diesel engine.
Generation III (all hydraulic proportional) joy stick power steering for...
This bridge deck finisher features all hydraulic controls and 25-hp engines powering the 36-in.-deep mainframe and the dual-roller finishing carriage.
Dual 8-in. diameter by 60-in. long finishing rollers
5-in. hydraulic carriage lift...