CSDA Announces 2015 Calendar

The Concrete Sawing & Drilling Association (CSDA) has scheduled the following events for 2015.

December 18, 2014

Concrete Sawing & Drilling Association (CSDA)

The Concrete Sawing & Drilling Association (CSDA) has scheduled the following events for 2015.

February 2-3 Training: Estimating, Las Vegas Convention Center, Las Vegas, Nev.
February 4 Meeting: Board of Directors, Las Vegas Convention Center, Las Vegas, Nev.
February 4 Ceremony: Concrete Openings Awards, Las Vegas Convention Center, Las Vegas, Nev.
February 4 Networking: Next Generation Reception, Renaissance Las Vegas Hotel, Las Vegas, Nev.
February 4-5 Training: Concrete Polishing, Las Vegas Convention Center, Las Vegas, Nev.
February 4-5 Training: Core Drilling & Hand Sawing 101, Las Vegas Convention Center, Las Vegas, Nev.
March 30 Meetings: Board and Committees, Renaissance Vinoy Resort, St. Petersburg, Fla.
March 31-April 2: Convention: 43rd Annual Convention, Renaissance Vinoy Resort, St. Petersburg, Fla.
April 1 Exhibition: CSDA Tech Fair, Renaissance Vinoy Resort, St. Petersburg, Fla.
June 4-5 Meetings: Board and Committees, Sheraton Kansas City Hotel, Kansas City, MO
September 10-11 Meetings: Board and Committees, Denver Marriott City Center, Denver, Colo.
November 2-3 Training: Slab Sawing & Drilling 201, St. Petersburg College, Clearwater, Fla.
November 4-5 Training: Wall & Hand Sawing 201, St. Petersburg College, Clearwater, Fla.
November 6-7 Training: Wire Sawing 201, St. Petersburg College, Clearwater, Fla.

For more information on any events listed, contact the CSDA office at (727) 577-5004.

Concrete Sawing & Drilling Association (CSDA)

White Cap has also acquired Crimson Steel Supply, LLC (Crimson Steel), a distributor and fabricator of engineered steel rebar and structural steel products serving non-residential and infrastructure end markets.

White Cap Expands Reach in Oklahoma, Oregon

White Cap has acquired Bend Construction - a supplier of struts, fasteners, anchors, and concrete accessories and products - and Crimson Steel - a distributor and fabricator of engineered steel rebar and structural steel products.

The Port of Baltimore is used by many of the largest construction machinery manufacturers.

Construction Supply Chain and the Baltimore Bridge Collapse

How much will construction and other supply chains be impacted by the collapse of the Baltimore Bridge and the suspension of traffic through the Port of Baltimore? End users may temporarily face delays and increases.

Emerging technologies and advancements including visual intelligence, sensors, Internet of Things (IoT) devices, robotics, immersive collaboration and 3D printing are surging in popularity among contractors and construction professionals.

Construction Trends for 2024

While the industry will continue to go through transformation like many others, those willing to marry the fundamentals of the craft with new technology and sustainable building methods can continue to experience great success in 2024 and beyond.

Unicontrol and Level Best, united in their commitment to driving innovation and efficiency in the construction industry, aim to push the boundaries of construction technology, setting new benchmarks for excellence as the industry becomes increasingly receptive to these advancements.

Unicontrol to Integrate 3D Tech With Level Best Equipment

By integrating Unicontrol's 3D machine control system with Level Best's precision grading equipment, this partnership aims to raise standards in machinery efficiency and usability.

White Cap has also acquired Crimson Steel Supply, LLC (Crimson Steel), a distributor and fabricator of engineered steel rebar and structural steel products serving non-residential and infrastructure end markets.

White Cap Expands Reach in Oklahoma, Oregon

White Cap has acquired Bend Construction - a supplier of struts, fasteners, anchors, and concrete accessories and products - and Crimson Steel - a distributor and fabricator of engineered steel rebar and structural steel products.

Adobe Stock 226955427

Designing an Effective Hiring Process

Getting the right people on your team is critical to the sustainability of your business. High turnover rates or underperforming team members can have a detrimental impact on your business and profitability.

The new facility, focused on high complexity and high variation specialty fifth wheel manufacturing, will include the current SAF-HOLLAND Wylie, Texas operation.

SAF-HOLLAND to Build New Factory in Texas

The new Rowlett facility is the next phase of the SAF-HOLLAND manufacturing optimization and vertical integration strategy to increase capacity output that began with the opening of its Piedras Negras, Coahuila, Mexico plant in August 2023.

Fires. Tornadoes. Water damage. All of these disasters, and other unexpected events, often lead to large property losses that can devastate businesses.

3 Tips for Managing Economic Risks on Construction Projects

While you can’t eliminate risk entirely, you can take steps to help reduce it, avoid it and protect against it.

Specific details regarding the actual price change will be communicated directly to customers by Trelleborg tires representatives in each market.

Trelleborg Tires to Implement Price Increases

Trelleborg tires will increase prices globally by up to 5% across all segments.

How Home-based Drug Deactivation and Disposal Saves Lives

Opioids in Construction: How Home-based Drug Deactivation & Disposal Saves Lives

Whether used by children or adults, excess medications in the household are a huge threat. Eliminating unused medications should be a top priority. Your employees should know that this is important to you as an employer.

Customer Service 10860910

Exceptional Customer Service Starts with Confidence

Customers want to know that the employee they are working with is confident and will be able to serve them in a professional manner.

While cranes play a vital role in the transportation, construction, and agriculture industries, among others, operating this type of equipment can be especially dangerous if proper protocol is not followed.

Crane Safety Report Published

As the crane industry continues to navigate major safety challenges, NSC and the NCCCO Foundation plan to continue to provide additional resources to educate crane operators, inspectors, and employers about potential workplace hazards.

JA Mitsui Leasing has announced that it has acquired a 100% interest in Oakmont Capital Holdings.

JA Mitsui Leasing Buys Oakmont Capital

JA Mitsui Leasing announced today that it has acquired a 100% interest in Oakmont Capital Holdings.

Whether it's support with succession planning or effective people management, its experts are uniquely positioned to skillfully guide contractors in harmonizing their personal, operational, and financial strategies.

Performance Construction to Focus on Contractor Community

With a shift to exclusively serving contractors, PCA’s Business Consulting services offer even more specialized guidance for its clients.

In the past five years, ConstructReach has partnered with over 100 industry and education partners to host “I built this!”, introducing more than 2,000 high school students to career pathways.

ConstructReach Hosts "I built this!" Construction Learning Event

Students will be able to participate in work-based learning through a variety of activities led by general contractors and construction professionals.

Equipment dealers have expressed great concern with the rule, particularly as it relates to service and delivery trucks, as well as the cost increases and equipment delivery delays that will ensue.

AED Opposes California Rule on Internal Combustion Trucks

The ACF regulation requires fleet operators to phase out their internal combustion trucks and replace them with zero-emission trucks, starting in 2024.

Continuing education is a crucial aspect of maintaining a license, and after the initial course, learners are required to complete 16 hours annually.

Bullseye and Interplay Partner to Provide Professional Inspector Training

Learners progress at their own pace, with the program typically taking about four months to complete.

Adobe Stock 172031594 Lev

Reminder: Call Before You Dig

To keep homeowners, families, and communities safe, a few days before breaking ground, make a free request to have the approximate location of buried lines marked with flags or paint by calling 811.

Rental Snapshot Zack Smith of Buffalo Equipment Rental

Rental Snapshot: Live in Texas & Give in Texas

Zack Smith has grown Buffalo Equipment Rental from just an idea to a successful family-operated rental business. He shares with us his biggest challenges, his ideal dinner guests, and more.

This webinar addresses purchasing guidelines crucial for Made-in-America purchasing in the construction and distribution sectors.

IIJA/BABA Purchasing Guidelines Explained in Webinar

The on-demand webinar delves into the bipartisan Infrastructure Investment and Jobs Act (IIJA) and the Build America, Buy America Act of 2021 (BABA).

Cold planers, such as this Bradco unit, are used for asphalt and concrete pothole and frost heave repair, curb cutting, pavement texturing and the removal of traffic lane stripes and roadway around manholes.

Cold Planer Attachment Maintenance for Best Performance

Manufacturers design cold planer attachments to require minimal maintenance. Unfortunately, this has led to many operators completely ignoring most maintenance functions with their picks.

Having the right insurance coverage, as well as effectively training your employees, is vital to minimizing liability exposure for your equipment rental business.

How Insurance, Training and Communication Can Protect Your Rental Business from Liability

Insurance, training and communication can go a long way toward protecting your equipment rental business from exposure to liability

Spanning 20,300 sq. ft., the new Cloquet, Minn. branch is specifically designed to support a larger material handling of equipment parts and rental inventory, provide comprehensive in-house shop service, and accommodate the company’s broad product offerings.

Fairchild Equipment Reveals New Facility in Cloquet

The new facility represents a step forward in Fairchild Equipment's ability to offer equipment maintenance and repair services, an expanded rental fleet, and a venue that better accommodates the company's product range.

Jon-Don has partnered with PPG to expand its offering of resinous floor coatings for concrete flooring.

Jon-Don Partners with PPG to Expand Resinous Coatings

Jon-Don has also partnered with PPG to create a series of one-day training events for concrete professionals who want to learn how to select and apply PPG products.

“I’ve been using Bobcat equipment for years on my farm in Waco, and I can’t imagine working without it. My Bobcat machines have empowered me to bring some of my biggest ideas to life,” said Gaines.

Bobcat Hires Magnolia Co-founder Gaines

From tending gardens to managing goats, pigs, and horses, Gaines is already sharing the work he is accomplishing with his Bobcat equipment.

Building Trades Recovery Week - Breaking Down Stigma and Creating Hope

Recovery Week: Breaking Down Stigma & Creating Hope

Hope, help, and healing come through recovery. The story behind Building Trades Recovery Week, how it started in Boston, and is now spreading throughout the New England construction industry.

Each episode will feature the journey of women in STEM, construction, and skilled trade careers with the goal of inspiring the next generation while fostering an inclusive environment where women are celebrated for their contributions every day.

John Deere Sponsors Women in Construction Docuseries

By showcasing the day-to-day lives, challenges, and accomplishments of women in these industries, John Deere and A Greener Tomorrow hope to raise awareness about the valuable contributions they make to the industry and beyond.