Cummins QSB Tier III Engines
The next-generation QSB four- and six-cylinder engines meet the EPA's Tier III emissions requirements.
Rated from 110 to 275 hp
State of the art electronics, common-rail fuel systems and increased displacement
Six-cylinder unit includes up to an 18% torque increase, while the four-cylinder provides an 18% increase
John Deere PowerTech 12.5L Engines
The PowerTech 12.5L engines were developed with Tier II requirements in mind.
Four-valve cylinder head and overhead cam
Electronic unit injectors allow for higher injection pressures to help meet emission regulations
Turbocharger improves air flow and engine performance
Deutz 1013 Series Diesel Engines
The 1013 Series of water-cooled, four- and six-cylinder, in-line diesel engines offers power ranges from 110 to 270 hp.
Fulfill Tier II EPA emissions regulations
Integrated cooling system
1.2L displacement per cylinder or 4.8 to 7.2L displacement
Hatz W35 Series Engines
The W35 series liquid-cooled engines feature cast aluminum crankcase halves split vertically, replacing approximately seven parts in a conventional engine.
Gear-driven camshaft and water pump
Standard flywheel alternator available with 12- and 24-volt systems
7- to 42-hp output
Comply with various worldwide emission regulations for exhaust and noise
Kubota E-Series Engine
The E-Series diesel engine features E-TVCS (three vortex combustion system) technology.
Offers reduced soot, unburned HC and CO emissions
Produces less NOx than traditional direct-injection systems
Briggs & Stratton Vanguard Big Block Engines
The Vanguard V-Twin Big Block air- and liquid-cooled commercial engines are available in the 25- to 35-hp range.
V-twin/overhead valve technology
Intake and exhaust system and large muffler for quiet operation
Lightweight aluminum block
Centrifugal, multi-stage industrial air cleaner
Honda GS Series
The GS series of engines includes the 6.0-hp GS190 horizontal shaft and 6.5-hp GSV190 vertical shaft models.
Air-cooled, four-stroke, OHC single-cylinder design
Uniblock construction
Internal timing belt design
Cast iron cylinder sleeve and redesigned piston with three-piece oil control ring
Dual-stage air filter with oiled pre-filter
Meet or exceed CARB and 2006 EPA emissions requirements
Honda GS Series
The GS series of engines includes the 6.0-hp GS190 horizontal shaft and 6.5-hp GSV190 vertical shaft models.
Air-cooled, four-stroke, OHC single-cylinder design
Uniblock construction
Internal timing belt design
Cast iron cylinder sleeve and redesigned piston with three-piece oil control ring
Dual-stage air filter with oiled pre-filter
Meet or exceed CARB and 2006 EPA emissions requirements
Detroit Diesel Series 60
The Series 60 heavy-duty diesel engine features electronic engine control and protection.
Ratings from 300 to 825 bhp at 1,200 to 2,300 rpm
Overhead camshaft eliminates pushrods for more optimized cylinder head design
Available features include cruise control, vehicle speed limiting and fuel economy reports
